Code 5 Cast Lead - 800mm x 3m 
Permavent Dry+ Breather Membrane 1m x 50m 
OX Trade XL Cuts All Tiles Diamond Blade 
ALM Code 5 Milled Lead - 1600mm x 6m 
Everbuild Lumberjack 30 Minute Polyurethane Wood Adhesive Gel – 310ml 
Everbuild 202 Integral Liquid Waterproofer – 5 Litre 
Code 4 Cast Lead - 1000mm x 3m 
20 Boxes x Extra Large Head Clout Nails, Galvanised 
Bond It FG8 Food Grade Silicone - White 310ml 
Code 3 Cast Lead - 300mm x 6m 
Ronseal One Coat Water-Based Tile Paint - White Gloss 750ml 
FloPlast Round Line Downpipe Clip, White 
Bond It Barrier Tape Yellow and Black - 70mm x 500M 
Everbuild Black Jack 905 All Weather Roof Coating – 5 Litre 
Timco 8 Spanner Set 
Klober Small Slate Vent - Slate Grey Roof Felt Adhesives
Best Sellers
-
Everbuild Resiblock Block Paving Sealer – Matt 5 Litre
£99.99 Incl VAT £83.33 Excl VAT Add to basket -
Aluflow Gutter Deepflow 90° – Internal or External (Black, Grey or White)
From: £30.76 Incl VAT £25.63 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
FloPlast Round Shoe – White
£1.74 Incl VAT £1.45 Excl VAT Add to basket -
Bond It All Weather Roofing Compound – Black 2.5L
£15.99 Incl VAT £13.33 Excl VAT Add to basket -
Spax Pozi Flat Countersunk Yellox Coated Screws – 3.5mm Diameter (Box of 200)
From: £4.60 Incl VAT £3.83 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Timco Hazard Warning Cloth Tape
From: £7.99 Incl VAT £6.66 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
