Ronseal Precision Finish Brush - 1 Inch Angled 
Timco Lithium EP2 Grease - 400g 
Cromar Black Bitumen Paint – 1 Litre 
ALM Code 3 Milled Lead - 390mm x 3m 
Code 5 Cast Lead - 180mm x 6m 
ALM Code 5 Milled Lead - 1000mm x 3m 
ALM Code 6 Milled Lead Flashing - 210mm x 3m 
Ronseal Diamond Hard Floor Wax - Natural Oak 2.5L 
OX Pro 6 Piece Bricklayers Set 
Soudal B2 Fire Rated Expanding Foam Gun Grade - 750ml (Box of 12) 
Everbuild Silicone Spray - 400ml (Box of 12) 
OX Pro Grout Remover Replacement Blades 50mm - Pack 2 
Everbuild Everflex 200 Contractors LMA Silicone - Black 295ml 
ALM Code 4 Milled Lead - 760mm x 3m 
Bond It Rubber Bitumen Emulsion - Black 5L 
Soudal PVCu Cream Cleaner - 1L 
Everbuild 406 Stabilising Solution - 5 Litre 
Soudal Handheld Gap Filler Expanding Foam - Champagne 750ml 
Everbuild 709 FebFlor Floor-Flex Plus - 5 Litre 
Klober Throat Adaptor - KG8000-3 
OX Pro OX-P133855 Easy Start Handsaw 550mm / 22in 
Freeflow 68mm Round Gutter Drain Pipe 112° Branch - White 
Code 6 Cast Lead - 390mm x 6m 
FloPlast Universal Hopper, Brown – 65-68mm Roof Felt Adhesives
Best Sellers
-
ERidge Dry Fix Ridge System Black – 6m Kit
£32.99 Incl VAT £27.49 Excl VAT Read more -
Code 3 Cast Lead – 1600mm x 3m
£205.63 Incl VAT £171.36 Excl VAT Add to basket -
Soudal Neutral Stay Fresh Sanitary Silicone Sealant – Clear 300ml
£9.89 Incl VAT £8.24 Excl VAT Add to basket -
Ronseal One Coat Water-Based Tile Paint – Cobalt Grey Gloss 750ml
£23.99 Incl VAT £19.99 Excl VAT Add to basket -
Everbuild Pinkgrip SF Solvent Free Adhesive – 380ml
£5.99 Incl VAT £4.99 Excl VAT Add to basket -
Ronseal One Coat Water-Based Tile Paint – White Satin 750ml
£19.99 Incl VAT £16.66 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
