Siroflex Trade Strength Medium Viscosity Superglue - 20g 
DeWalt FLEXTORQ Set PZ2 + Drive Guide in Small Bulk Storage Case 
FloPlast Square Line Stop End Outlet Black – 114mm x 65mm 
Everbuild Febond PVA - 5L 
Soudal PVCu Cream Cleaner - 1L 
Code 4 Cast Lead - 600mm x 3m 
Bond It Gripbond Pro Max Adhesive - White EU3 
Everbuild Firefoam B2 Gun Grade - Pink 750ml 
OX Trade 14 Drive Socket Set - 35 Piece 
Everbuild Everflex Contract AC95 Intumescent Sealant & Adhesive - 900ml 
FrogTape® Delicate Surface Masking Tape - Yellow 36mm x 41.1m 
Code 6 Cast Lead - 390mm x 3m 
Cromar Alphachem Liquid Mortar Tone - Black 5L 
Hedgehog Gutter Brush Leaf Guard Black – 4m x 150mm 
Everbuild PVC Hazard Tape - Black/Yellow (50mm x 33m) 
Timco Copper Slate Straps 
Soudal Trade Sanitary Silicone - White 290ml 
Code 5 Cast Lead - 1600mm x 3m 
Timloc Eaves Comb Filler 1m 
FloPlast Square 112° Offset Downpipe - White 
ALM Code 8 Milled Lead - 1600mm x 6m 
ALM Code 4 Milled Lead - 1200mm x 3m 
Everbuild Clear Fix – 290ml (Box of 12) 
Siroflex Trade Superglue Activator Spray - 200ml 
Everbuild Caulk Once – White 380ml (Box of 12) 
Soudal Grab Solvent Based Adhesive, Beige 
Cromar Cold Gritting Solution - Black 5 Litres Roof Felt Adhesives
Best Sellers
-
Soudal Silicone Spray – 400ml
£9.99 Incl VAT £8.33 Excl VAT Add to basket -
Estwing Ultra Series Black Hammer – 15oz (EB-15SR)
£69.99 Incl VAT £58.33 Excl VAT Read more -
OX Speedskim Semi Flexible Plastering Rule
From: £40.49 Incl VAT £33.74 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Roughneck® Square Micro Shovel
£19.49 Incl VAT £16.24 Excl VAT Read more -
Timco High Visibility Wet Paint Tape
£6.99 Incl VAT £5.83 Excl VAT Add to basket -
Everbuild Anchorset Green 150 – Grey 150ml
£6.99 Incl VAT £5.83 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
