Code 6 Cast Lead - 800mm x 6m 
Soudal Neutral Stay Fresh Sanitary Silicone Sealant – White 300ml 
Timloc 1206 Underfloor Vent Horizontal Rear Extension + 100mm 
Evo-Stik Gripfill Gap Filling Adhesive – 350ml 
Armatool Mop Heads Size 12 
ALM Code 6 Milled Lead Flashing - 210mm x 3m 
Bond It Patination Oil 500ml 
Timloc Interlocking Plain Tile Vent Brown (Box of 12) 
FloPlast Half Round Gutter 90° Bend, Black – 112mm 
Timco Metal Galvanised Insulation Discs - 35mm 
Cromar Protect 1F Non-Breathable Roofing Felt – 1m x 45m 
Ronseal One Coat Stain Block - White 2.5L 
ALM Code 5 Milled Lead - 914mm x 6m 
Code 5 Cast Lead - 450mm x 3m 
Bond It A70 Studlock Anaerobic High Strength Adhesive - 50ml Green 
Siroflex Trade High Viscosity Superglue - 20g 
Everbuild Stick2 Rapid Epoxy Tube (2 x 12ml) 
Code 7 Cast Lead - 850mm x 6m 
Soudal Fix ALL Turbo - White 290ml (Box of 12) 
Colron Refined Finishing Wax - 325g 
Hambleside Danelaw Double Plain Tile Vent, TV10/9 - Black (Box of 5) 
Hambleside Danelaw Single Pantile Roof Tile Vent, TV10/8 - Slate Grey (Box of 5) 
Everbuild Stixall Extreme Power – Black 290ml 
Everbuild Jetcem Deep Rapid Repair Sand & Cement – 2kg 
FloPlast Round Line Downpipe Clip, Black 
Ronseal Precision Finish Brush - 5 Pack 
Timco Lifting Sling 3000kg Limit - 3m x 90mm 
Soudal Insulating Foam Genius Gun 750ml - Champagne (Box of 12) 
ALM Code 4 Milled Lead - 390mm x 3m 
Klober 20K Slate Vent KG9795-0429 Slate Grey 
Everbuild 402 Waterseal – 25 Litre Roof Felt Adhesives
Best Sellers
-
Bostik General Purpose Aerosol – 500ml
£8.49 Incl VAT £7.08 Excl VAT Read more -
Timco Cable Tray Bolts with Flange Nuts – M6 x 25mm
£9.99 Incl VAT £8.33 Excl VAT Read more -
Klober Single Pantile Vent – Antique Red KG9860-0116 (Box of 10)
£215.99 Incl VAT £179.99 Excl VAT Add to basket -
Everbuild Maximum Torque – White 290ml
£7.89 Incl VAT £6.58 Excl VAT Add to basket -
Left Hand Klober Contract Dry Verge Unit Grey
£4.90 Incl VAT £4.08 Excl VAT Add to basket -
FloPlast Half Round Downpipe Shoe, Black – 68mm
£4.99 Incl VAT £4.16 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
