Code 5 Cast Lead - 390mm x 3m 
FloPlast Downpipe Rainwater Diverter Kit RVS1 
Ronseal One Coat Stain Block - White 2.5L 
FloPlast Half Round Downpipe 112° Bend, White 
ALM Code 4 Milled Lead - 850mm x 6m 
ALM Code 3 Milled Lead - 390mm x 6m 
Bond It Professional Foam Gun Applicator 1M 
Timco Hazard Tape 
BORA - PM-4550 Adjustable Speedhorse XT 
Lead Roofing Wood Core Roll (50mm x 2.4m) 
ALM Code 5 Milled Lead - 150mm x 3m 
Everbuild Everflex 200 Contractors LMA Silicone - Brown 295ml 
Ronseal One Coat Stays White Radiator Paint - Gloss 250ml 
Everbuild All Purpose Ready Mixed Filler - 1kg 
84 x ERidge Dry Fix Ridge System + DeWalt XR Combi Drill & Impact Driver Twin Pack 
Timco Collated Drywall Self Drilling Screws 
Ronseal Anti-Bacterial Worktop Oil - Clear 500ml 
Everbuild Anchorset Green 150 - Grey 150ml 
Bond It Aerosol Spray Adhesive - 500ml Beige 
Hambleside Danelaw Single Pantile Roof Tile Vent, TV10/8 - Antique Red (Box of 5) 
Klober Thin Line Vent - Terracotta KG9855-3-0152 (Box of 10) 
Timloc Double Pantile Tile Vent Red (Box of 6) 
Soudal Multi Cleaner - 400ml 
OX Tools 12 inch / 300mm Trade Plastic Plasterers Mud Pan 
Thompson's Water Seal - 5L 
Soudal Genius Gun Gap Filling and Expanding Foam - 500ml (Box of 12) 
Timloc Universal Roof Slate Vent + Adaptor kit 
ALM Code 8 Milled Lead - 1200mm x 6m 
DeWalt 18V XR Compact Jobsite Blower Bare Unit - (DCV100-XJ) 
Siroflex Trade High Viscosity Superglue - 50g 
Everbuild EuroScrim Plasterboard Tape – 100mm x 90m 
Bond It Superglue Activator Accelerator Spray Cyanoacrylate Aerosol - 400ml 
FloPlast Square Line Downpipe Offset Bend 92.5° White – 65mm 
Hambleside Danelaw Single Pantile Roof Tile Vent, TV10/8 - Slate Grey (Box of 5) 
Ronseal Diamond Hard Floor Paint - Anthracite Satin 750ml 
Timco Round Wire Nails, Pack of 40 
Everbuild Roof & Gutter Sealant – Black 295ml 
Everbuild Jetcem Deep Rapid Repair Sand & Cement – 2kg 
Bond It Multi-Purpose Powder Filler - White 1.5Kg 
Everbuild Aquaseal Liquid Roof – Slate Grey 7kg 
Everbuild Seal Rite Strip Out Tool 
Colron Liquid Scratch Cover - Light 14ml 
Freeflow 112mm Round Gutter System Running Outlet - White 
Bond It Superglue Activator Accelerator Spray Cyanoacrylate Aerosol - 200ml 
Everbuild Everflex 200 Contractors LMA Silicone - White 295ml 
Code 6 Cast Lead - 1200mm x 3m 
Klober Profile-Line Flat Tile Vent - Slate Grey KG9856-3-0429 (Box of 10) 
OB41 Multi-Use Penetrating Oil Spray - 400ml 
Soudal Glass and Mirror Cleaner - 1 Litre Roof Felt Adhesives
Best Sellers
-
Code 3 Cast Lead – 1000mm x 6m
£257.04 Incl VAT £214.20 Excl VAT Add to basket -
Thompson’s Water Seal – 2.5L
£18.81 Incl VAT £15.68 Excl VAT Add to basket -
Colron Refined Wood Dye – 500ml
From: £15.99 Incl VAT £13.33 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Klober Thin Line Vent – Antique Red KG9855-3-0116 (Box of 10)
£215.99 Incl VAT £179.99 Excl VAT Add to basket -
Code 7 Cast Lead – 360mm x 6m
£219.91 Incl VAT £183.26 Excl VAT Add to basket -
OX Softshell – Black & Grey
From: £39.49 Incl VAT £32.91 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
