FloPlast Half Round Downpipe Shoe, Black – 68mm 
Ronseal Interior Varnish - Clear Satin 2.5L 
Code 7 Cast Lead - 850mm x 6m 
Code 5 Cast Lead - 600mm x 3m 
Samac Snowguard - 150mm x 2m 
ALM Code 3 Milled Lead - 180mm x 3m 
Restec 1010 Liquid Catalyst - 5kg 
OX Tools Trade Bucket, Black - 15 Litre 
Bond It Trowel Mastic - Black 5L 
Ronseal Multi Purpose Wood Filler - Natural 930g 
ALM Code 8 Milled Lead - 1000mm x 6m 
Easy-Trim Lead R Flashing Smooth – 600mm x 5m 
Ronseal Precision Finish Brush - 2 Inch 
ALM Code 6 Milled Lead Flashing - 914mm x 6m 
Bond It Oil Stain Remover - White 1L 
Ronseal uPVC Paint - White Satin 2.5L 
Everbuild 102 Butyl Glazing Compound - Brown 2kg 
Soudal Degrip All Spray – 400ml 
Bond It PVA & Adhesive Sealer - White 5L 
OX Pro Tough Bucket, Blue - 15 Litre 
Evo-Stik Gripfill Gap Filling Adhesive – 350ml 
Code 8 Cast Lead - 360mm x 6m 
Bond It Barrier Tape Yellow and Black - 70mm x 500M 
Bond It PVCu Solvent Fast Acting Cleaner - Clear 1L 
Everbuild Forever Grey Silicone Sealant – 295ml 
Code 6 Cast Lead - 1000mm x 6m Roof Felt Adhesives
Best Sellers
-
Timco Twin-Cut C2 Floor-Fix Screws – 4.2mm x 55mm (Tub of 250)
£13.99 Incl VAT £11.66 Excl VAT Add to basket -
Permavent Dry+ Breather Membrane 1m x 50m
£189.99 Incl VAT £158.33 Excl VAT Add to basket -
OX Trade Plastic Finishing Trowel
From: £18.99 Incl VAT £15.83 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Cromar All Weather Roof Coat – Black 5 Litre
£20.95 Incl VAT £17.46 Excl VAT Add to basket -
Wabis Universal Dry Ridge System 6m Kit
£35.50 Incl VAT £29.58 Excl VAT Read more -
Ronseal Quick Drying Woodstain – Satin 2.5L
From: £34.99 Incl VAT £29.16 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
