Bond It Monster Wipes - White 75 Wipes 
Ronseal Precision Finish Brush - 2 Inch 
Klober Throat Adaptor - KG8000-3 
FloPlast Half Round Downpipe Branch 67.5°, Brown 
Ronseal Stays White 2in1 Paint & Primer - Gloss 2.5L 
Spax Magnetic Bit Holder - 1 Piece 
IKO Easymelt Bonding Bitumen Keg - 10kg 
Everbuild Everflex Pyro Mate Fire Rated Silicone – White 295ml (Box of 12) 
Ox Tools OX Pro Aviation Snips With Holster - Left Cut (Red) 
Everbuild Jetcem Plaster Rapid Repair – 6kg 
Thompson's One Coat Damp Seal - White 750ml 
Timloc Standard Roof Tile Vent Adaptor 
Bond It Power Proof Concentrated Waterproof Render Admixture - 1 Litre 
Code 6 Cast Lead - 210mm x 3m 
Everbuild KOS Fire Cement Buff – 500g 
84 x ERidge Dry Fix Ridge System Black – 6m Kit 
Timco Driver and Ground Jobber Bit Set 
Everbuild Tecnic Silicone 825 – Limestone White 380ml (Box of 25) 
OX Polyzip Flex C2 Cutter - 25mm to 55mm 
OX Pro Aluminium Metric Rafters Square - 180mm 
Everbuild Caulk Once – White 295ml (Box of 12) 
Premium Stainless Steel Fixing Strips - 20m x 50mm x 0.4mm 
Everbuild Mammoth Clear Weatherproof Tape 
Timco Classic Pozi Multi-Purpose Screws - Mixed Tray 
ALM Code 6 Milled Lead Flashing - 1600mm x 6m 
Code 8 Cast Lead - 914mm x 6m 
Everbuild Forever Ivory Silicone Sealant – 295ml (Box of 12) 
FloPlast Half Round Gutter 90° Bend, Black – 112mm 
Code 5 Cast Lead - 850mm x 3m Roof Felt Adhesives
Best Sellers
-
Sika Dustproofer – Clear 5 Litre
£17.90 Incl VAT £14.92 Excl VAT Add to basket -
Colron Liquid Scratch Cover – Medium 14ml
£10.99 Incl VAT £9.16 Excl VAT Add to basket -
Marley Vapour Permeable Underlay 1m x 50m
£109.99 Incl VAT £91.66 Excl VAT Read more -
Everbuild Lumberjack 5 Minute Wood Adhesive Deal
£320.64 Incl VAT £267.20 Excl VAT Add to basket -
OB41 Silicone Lubricant Spray 400ml
£10.79 Incl VAT £8.99 Excl VAT Add to basket -
Code 4 Cast Lead – 510mm x 3m
£88.54 Incl VAT £73.78 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
