Everbuild Anchorset Green 300 - Grey 300ml (Box of 12) 
Soudal Neutral Stay Fresh Sanitary Silicone Sealant – White 300ml 
Everbuild Jumbo Mitre Fast Kit Superglue & Activator 
FloPlast Ogee Fascia Bracket, Black 
Soudafoam Window & Door Xtra Gun Grade, Champagne - 750ml 
Hambleside Danelaw (HD PCSPA) Tile Vent Adaptor and Flexi for TV10 Range 
Bond It Rubber Bitumen Emulsion - Black 2.5L 
Code 7 Cast Lead - 300mm x 3m 
Everbuild KOS Fire Cement Buff – 2kg 
Everbuild P18 Gas Leak Detector - 400ml 
Timco Impact Driver Bit Set 
Everbuild Seal Rite Strip / Smooth Out Twin Pack 
Soudal PVCu Solvent Frame Cleaner - 1L (Box of 12) 
Timco Screwdriver 4-Tool Set 
Everbuild Gun A Nail Standard – White 310ml 
Everbuild Everflex 225 Industrial & Glazing Silicone - White 295ml (Box of 25) 
Everbuild P18 Gas Leak Detector - 400ml (Box of 12) 
Timloc Plain Tile Vent Red (Box of 14) 
Easy-Trim Lead R Flashing Textured – 600mm x 5m 
Freeflow 68mm Round Gutter Drain Pipe 112° Branch - Black 
Bond It Sealant Applicator Tool 
ALM Code 4 Milled Lead - 850mm x 6m 
Restec Flexitec 2020 Roofing Kit - (10m²) 
FloPlast Square Fascia Bracket Black – 114mm 
Code 6 Cast Lead - 850mm x 6m Roof Felt Adhesives
Best Sellers
-
Lead Bossing Mallet 50mm & 70mm
From: £26.49 Incl VAT £22.08 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
FloPlast Half Round Union Unit – White
£1.89 Incl VAT £1.58 Excl VAT Add to basket -
Soudal Fix ALL High Tack Hybrid Sealant – Invisible 290ml
£6.99 Incl VAT £5.83 Excl VAT Add to basket -
Everbuild KOS Fire Cement Buff – 500g
£6.99 Incl VAT £5.83 Excl VAT Add to basket -
Everbuild 401 Brick & Patio Cleaner – 5 Litre
£12.99 Incl VAT £10.83 Excl VAT Read more -
Youngman Double Section Roof Ladder 4.33m (57664000)
£434.51 Incl VAT £362.09 Excl VAT Read more
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
