Everflex Premium+ 450 Builders Silicone – Oak 300ml (Box of 25) 
Timloc Telescopic Underfloor Vent 5-7 Courses 
ALM Code 6 Milled Lead Flashing - 1200mm x 3m 
Cromar Cold Gritting Solution - Black 25 Litres 
Hambleside Danelaw (HD DPCSPA) Tile Vent Adaptor and Flexi for TV10 Range 
Cromar Vent 3 Air High Performance Breathable Membrane 1m x 50m 
Everbuild Triple Action Wood Treatment – 5 Litre 
Code 7 Cast Lead - 510mm x 6m 
Easy-Trim Ridge F Universal Dry Ridge System - 6m Kit 
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent - Antique Red (Box of 5) 
Timco Air Wedge 
FloPlast Half Round Downpipe 112° Bend, Brown 
Timloc Non-Profile Tile Vent Red (Box of 8) 
Everbuild Lumberjack 30 Minute PU Wood Adhesive Liquid – 750ml (Box of 12) 
FloPlast Square to Round Downpipe Adaptor - White 
Everbuild KOS Fire Cement Buff – 1kg 
ALM Code 5 Milled Lead - 1600mm x 3m 
Code 3 Cast Lead - 1600mm x 3m 
Bond It Economy Sealant Gun - Blue 400ml (EU3 + EU4) 
Armatool Lead Dresser Set - 5 Piece Set 
OX Trade 3 Piece Paint Brush Set - 25/38/50mm 
ALM Code 4 Milled Lead - 240mm x 3m 
Code 8 Cast Lead - 300mm x 3m Roof Felt Adhesives
Best Sellers
-
ALM Code 7 Milled Lead – 300mm x 6m
£181.25 Incl VAT £151.04 Excl VAT Add to basket -
Axgard 8mm Solid Polycarbonate Sheet, Clear
From: £40.66 Incl VAT £33.88 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Klober Boll Roll Tile Vent KG6085, Brown
£49.99 Incl VAT £41.66 Excl VAT Read more -
Everbuild Trafficline Spray Permanent – 700ml
From: £8.99 Incl VAT £7.49 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Everflex Contract AC95 Intumescent Sealant & Adhesive – White 900ml (Box of 12)
£58.56 Incl VAT £48.80 Excl VAT Add to basket -
Sekosnap Side Section
From: £10.42 Incl VAT £8.68 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
