FloPlast Half Round Gutter Union, White 
Bond It The Beast PU Adhesive - Brown 250ml 
Restec Flexitec 2020 Roofing Kit - (10m²) 
Everbuild Stixall Extreme Power – White 290ml 
OX Pro Heavy Duty Aviation Snips Straight Cut (Yellow) 
Timco Pozi C2 Strong-Fix Twin Cut Screws - 4.0mm x 40mm (Box of 200) 
Code 4 Cast Lead - 600mm x 3m 
Code 7 Cast Lead - 150mm x 3m 
Everbuild Maximum Torque - White 290ml 
Everbuild Mortar & Tile Grout Pro Pointing Gun Kit 
Bulk pallet 125 packs - Classic Multi-Purpose Screws 4.0 x 50 Double Countersunk - A2 Stainless Steel - 200 Box 
Thompson's Water Seal - 1L 
Code 6 Cast Lead - 450mm x 6m 
Bond It The Beast PU Adhesive - Brown 150ml 
Everbuild Plumbers PVC Pipe Cement - Clear 250ml (Box of 12) 
Everbuild Stick2 Industrial Superglue GP - Transparent 20g 
Code 8 Cast Lead - 210mm x 3m 
Everbuild Tarmac Restorer - 5 Litre 
Everbuild Black Jack 903 Bitumen Trowel Mastic – 2.5 Litre 
Everbuild PVCu Acti-Spray – Clear 200ml (Box of 12) 
Thompson's One Coat Patio & Block Paving Seal - 5L 
Bond It Economy Sealant Gun - Blue 900ml 
Everbuild Forever Ivory Silicone Sealant – 295ml (Box of 12) 
Timco M6 Zip-Fix Cavity Wall Fixings - 10 Pieces 
Timco Carpenter’s Speed Auger & Flat Wood Bit Kit 
Ronseal One Coat Stain Block - White 2.5L Roof Felt Adhesives
Best Sellers
-
ALM Code 5 Milled Lead – 914mm x 3m
£198.24 Incl VAT £165.20 Excl VAT Add to basket -
Werner LadderLok (45009)
£50.78 Incl VAT £42.32 Excl VAT Read more -
Code 3 Cast Lead – 1600mm x 6m
£411.26 Incl VAT £342.72 Excl VAT Add to basket -
OX Pro Jab Saw – 6.5″ / 165mm & Holster Pack
£16.48 Incl VAT £13.73 Excl VAT Add to basket -
Bond It Power Proof Concentrated Waterproof Render Admixture – 1 Litre
£11.99 Incl VAT £9.99 Excl VAT Add to basket -
Soudal 30 Min D4 Gel PU Wood Adhesive Trade – 290ml
£5.99 Incl VAT £4.99 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
