Soudal PVCu Gap Filler, White - 300ml (Box of 12) 
Hambleside Danelaw Double Pantile Vent TV15/2 - Brown (Box of 5) 
Bond It Decking Oil - Natural 2.5L 
ALM Code 7 Milled Lead - 300mm x 6m 
Soudal Genius Gun Gap Filling and Expanding Foam - 500ml (Box of 12) 
Samac Aluminium Clout Nails - 55mm x 3.35mm (1kg) 
Everbuild 501 PVA – 500ml 
ALM Code 6 Milled Lead Flashing - 450mm x 3m 
Timloc Double Pantile Tile Vent Red (Box of 6) 
Soudal Genius Gun Plasterboard Adhesive - 750ml 
Armatool Slate Guillotone 
Freeflow 112mm Round Gutter System Stopend Outlet - White 
Everbuild Gun A Nail Standard – White 310ml 
Everbuild Forever White Powder Wall Tile Grout – 1.2kg 
ALM Code 5 Milled Lead - 600mm x 6m 
Ronseal Diamond Hard Floor Varnish - Clear Gloss 2.5L 
Easy-Trim Over Fascia Vent - 25mm x 1m 
FloPlast Half Round Downpipe Branch 67.5°, White 
Code 6 Cast Lead - 360mm x 6m 
Bond It Frame-Mate Door & Window Sealant - White EU3 
Timco Copper Slate Straps 
Permavent Easy Slate 500 - Box of 100 
Hambleside Danelaw TV10/6 Flush Fit Tile Vent - Brown (Box of 5) 
OX Pro Brick Trowel Philadelphia Pattern - 10"/250mm 
Code 4 Cast Lead - 210mm x 6m 
Ronseal One Coat All Surface Primer and Undercoat - White 250ml Roof Felt Adhesives
Best Sellers
-
Code 7 Cast Lead – 300mm x 3m
£91.39 Incl VAT £76.16 Excl VAT Add to basket -
Soudal Orange Skeleton Gun – Up to 310ml
£7.99 Incl VAT £6.66 Excl VAT Add to basket -
Thompson’s One Coat Waterseal – 1L
£12.79 Incl VAT £10.66 Excl VAT Add to basket -
OX Pro 5m/16ft Tuff Blade Tape Measure Magnetic Dual Hook & 32mm Wide Blade
£18.99 Incl VAT £15.83 Excl VAT Read more -
OX Spectrum Premium Diamond Blade – Mortar Raking
From: £21.99 Incl VAT £18.33 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
OX Tools Trade Bucket, Black – 15 Litre
£4.99 Incl VAT £4.16 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
