ALM Code 5 Milled Lead - 210mm x 6m 
OX Tools Trade Bucket, Black - 15 Litre 
Ronseal Diamond Hard Floor Wax - Natural Oak 2.5L 
Soudal Soudafoam Gap Filler Hand Held 750ml 
ALM Code 3 Milled Lead - 360mm x 3m 
OX Tough Builders Socks (UK 6-11) 
Timco Flat Wood Bit 1/4" Extension Rod - 150mm 
Bond It Foil Safe Solvent Cleaner - Clear 1L 
Everbuild Everflex 125 One Hour Caulk Magnolia 300ml (Box of 25) 
Bond It Gripbond - Solvent-Free Adhesive - White 350ml 
ALM Code 8 Milled Lead - 180mm x 3m 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, Brown - 300ml (Box of 12) 
Easy-Trim Ridge F Universal Dry Ridge System - 6m Kit (Pallet of 84 Boxes) 
Everbuild Mitre Fast Industrial Kit Superglue & Activator 
Timco M6 Zip-Fix Cavity Wall Fixings - 10 Pieces 
Everbuild Mitre Fast Industrial Kit Superglue (Box of 24) 
Timco 8 Spanner Set 
Everbuild Multi-Use Giant Wonder Wipes Tub (300 Wipes) 
Bond It Multi-Purpose Powder Filler - White 450g 
Soudal Neutral Stay Fresh Sanitary Silicone Sealant – Clear 300ml 
Armatool Stripping Spade 
ALM Code 7 Milled Lead - 300mm x 3m 
OX Pro Pool Trowel, Rigid 450MM / 18" 
Hambleside Danelaw (HD PCSPA) Tile Vent Adaptor and Flexi for TV10 Range 
Siroflex Seal & Fix Hybrid Adhesive 
Siroflex Heavy Duty PVCu Solvent Cleaner - 1L Roof Felt Adhesives
Best Sellers
-
Timloc Single Pantile Tile Vent Terracotta (Box of 11)
£186.89 Incl VAT £155.74 Excl VAT Read more -
Hambleside Danelaw Single Pantile Roof Tile Vent, TV10/8 – Black (Box of 5)
£114.99 Incl VAT £95.83 Excl VAT Add to basket -
Timloc Castellated Tile Vent Brown (Box of 8)
£159.89 Incl VAT £133.24 Excl VAT Read more -
OX Pro Tough Bucket, Blue – 15 Litre
£7.59 Incl VAT £6.33 Excl VAT Add to basket -
9 x YBS SuperQuilt 19 Multi-Layer Foil Insulation – 1.5m x 10m
£1,148.11 Incl VAT £956.76 Excl VAT Read more -
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent – Brown (Box of 5)
£114.99 Incl VAT £95.83 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
