Soudal Soudafoam Gap Filler Hand Held 750ml 
Timco Anti-Slip Tape 
ALM Code 8 Milled Lead - 240mm x 3m 
Armatool Leather Pouch & Leather Belt 
Bond It Bitumen Primer - Black 2.5L 
Everbuild Evercryl One Coat Grey – 20kg 
Ronseal Precision Finish Brush - 0.5 Inch 
Timco Grouting Float 
Code 6 Cast Lead - 450mm x 3m 
Soudal 30 Min D4 Gel PU Wood Adhesive Trade - 290ml 
OX Pro Tuff Rule - Cyan 
Everbuild Pinkgrip SF But It’s White – 380ml (Box of 12) 
Timco Mixed Carriage Bolts, Nuts and Washers Grab Pack 
Timco Mixed Hose Clips 
ALM Code 7 Milled Lead - 850mm x 6m 
Freeflow 68mm Round Gutter Drain Pipe 112° Branch - White 
Everflex Galva Mate Duct Sealant - C3 
Timco Nut Mix Grab Pack - 980 Pieces 
Everbuild Glass Protector - Red (600mm x 25m) 
ALM Code 4 Milled Lead - 914mm x 3m 
Timloc Plastic Insulation Retaining Discs - 80mm Red (Pack of 250) 
Soudal Insulating Foam Genius Gun 750ml - Champagne (Box of 12) 
Bond It Professional Foam Gun Applicator 
Everbuild 209 Liquid Mortar Tone - Black 1 Litre 
FloPlast Round 92½° Bend - White 
Cromar Vent 3 Light Breathable Membrane - 1m x 25m 
BOND IT Power Mix Concentrated Liquid Mortar Plasticiser - 500ml Brown 
Samac Copper Wire Coil 36m x 2mm 
OX Pro Chalk Refill, White – 226g 
Easy-Trim End Cap Angled - Black (Box of 10) 
FloPlast Round 92½° Bend - Brown 
Ronseal uPVC Paint - White Satin 2.5L 
OX Pro Semi Round Dutch Pin, Swivel Arm - 4 Pack 
OX Trade Tile Cleaner 120 x 250mm 
Ronseal Quick Drying Radiator Spray Paint - White Gloss 400ml 
FloPlast Downpipe Rainwater Diverter Kit RVS1 
Samac Aluminium Clout - 1kg (40mm x 2.65mm) 
Everbuild Exact Gap Foam - 750ml (Box of 12) 
Code 8 Cast Lead - 1200mm x 6m 
Bond It Silicone Ultra Waterseal - Clear 5L 
Ronseal Kitchen & Bathroom Touch-Up Enamel - 10ml 
OX Tools 600/1200/1800mm Pro Spirit Level Set with Bag 
Everbuild EB25 Ultimate Sealant & Adhesive – Black 300ml (Box of 12) 
Cromar Roof Felt Adhesive - Black 2.5 Litre Flashing Tape
Best Sellers
-
Timloc Non-Profile Tile Vent Red (Box of 8)
£159.99 Incl VAT £133.33 Excl VAT Add to basket -
FloPlast Half Round Downpipe Shoe, Black – 68mm
£4.99 Incl VAT £4.16 Excl VAT Add to basket -
Everbuild Everflex Premium+ 500 Bath & Sanitary Silicone – Clear 295ml (Box of 25)
£89.00 Incl VAT £74.17 Excl VAT Add to basket -
Samac Galvanised ELH Felt Nails – 50mm x 3.00mm
From: £6.70 Incl VAT £5.58 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
OX Pro 2 Piece Long Screwdriver Set – PZ2 + Flat Head (Slotted)
£6.99 Incl VAT £5.83 Excl VAT Read more -
OX Speedskim Semi Flexible Plastering Rule
From: £40.49 Incl VAT £33.74 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
