FloPlast Half Round External Stop End, Black – 112mm 
Code 7 Cast Lead - 850mm x 6m 
Ronseal Exterior Multi-Purpose Smooth Finish Filler - Grey 1.2Kg 
ALM Code 7 Milled Lead - 914mm x 6m 
Ronseal Diamond Hard Floor Varnish - Clear Gloss 2.5L 
Everbuild 402 Waterseal – 5 Litre 
Ronseal Hairline Crack Ready Mix Wall Filler - White 330g 
ALM Code 8 Milled Lead - 1200mm x 3m 
ALM Code 4 Milled Lead - 360mm x 3m 
Everbuild Lumberjack 550 Floor Adhesive – Buff 300ml (Box of 12) 
Hambleside Danelaw Double Plain Tile Vent, TV10/9 - Brown (Box of 5) 
OX Tools Trade Bucket, Black - 15 Litre 
FloPlast Half Round Gutter Union, Brown 
Bond It Patio Blaster - Clear 2.5L 
Soudal 5 Minute D4 Wood Adhesive Liquid – 750g 
Everbuild Black Jack 905 All Weather Roof Coating – 5 Litre 
Everbuild KOS Fire Cement Buff – 2kg 
OX Pro Tuff Rule - Cyan 
Soudal Fix ALL High Tack – White 290ml (Box of 12) 
FloPlast Half Round Internal Stop End, Brown – 112mm 
ALM Code 6 Milled Lead Flashing - 450mm x 6m Flashing Tape
Best Sellers
-
Everbuild Everflex Heat Mate Sealant – Red 295ml
£11.29 Incl VAT £9.41 Excl VAT Add to basket -
Corrapol-BT Corrugated Bitumen Fixings
From: £11.90 Incl VAT £9.92 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Easy-Trim Lead R Flashing Smooth – 600mm x 5m
£77.75 Incl VAT £64.79 Excl VAT Add to basket -
Soudal Fix ALL Turbo – White 290ml
£9.99 Incl VAT £8.33 Excl VAT Add to basket -
Ronseal Diamond Hard Doorstep Paint – Tile Red Satin 750ml
£14.35 Incl VAT £11.96 Excl VAT Add to basket -
Bostik Handy Hot Melt Glue Gun
£14.99 Incl VAT £12.49 Excl VAT Read more
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
