ALM Code 5 Milled Lead - 1000mm x 6m 
OX Tools Pro Torpedo Level, 9" / 230mm 
Code 6 Cast Lead - 1600mm x 6m 
Everbuild Silicone Spray - 400ml (Box of 12) 
Everbuild Silicone Eater Silicone Sealant Remover - 100ml (Box of 12) 
Bostik Builder Tape, 50mm - 25m 
Timco Multi-Fix Masonry Bolts, Hex Head 25pcs - 10.0 x 150mm 
ALM Code 8 Milled Lead - 390mm x 6m 
Circular Soffit Vent, White 
OX Tools 12 inch / 300mm Pro Stainless Steel Plasterers Mud Pan 
Thompson's One Coat Damp Seal - White 750ml 
Timloc Multi Stepped Duct Adaptor (Fits 100/110/125/150mm Duct) 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, Clear - 300ml (Box of 12) 
Ronseal Multi Purpose Smooth Finish Filler - 1.2kg + 50% Free 
Everbuild Seal Rite Strip Out Tool 
Timco Nut Mix Grab Pack - 980 Pieces 
Over Fascia Vent, 25mm Single 
Timloc Non-Profile Tile Vent Red (Box of 8) 
Code 8 Cast Lead - 760mm x 3m 
Cromar Vent 3 Classic Breathable Membrane - 1.5m x 50m 
Bond It Contractors PVA - 2.5L White 
Everflex Premium+ 450 Builders Silicone – Oak 300ml (Box of 25) 
ALM Code 7 Milled Lead - 180mm x 6m 
BORA - PM-4550 Adjustable Speedhorse XT (Set of 2) 
Hambleside Danelaw Double Pantile Vent TV15/2 - Antique Red (Box of 5) 
Everbuild Febond PVA - 1L 
Patination Oil Lead Mate Flashing Protection Coating - 500ML 
201 Mortar Admix – 5 Litre 
Everbuild General Purpose Silicone - Black 290ml (Box of 12) 
Armatool Leather Pouch & Leather Belt 
OX Pro Wide Head End Cutting Nippers - 200mm 
Freeflow 68mm Round Down Pipe Shoe - White 
Irwin Jack Plus 880 Universal Handsaw - 20" (Pack of 10) 
Bond It Monster Water Resistant Tape - 48mm x 11m (Black) 
Everbuild Forever Grey Silicone Sealant – 295ml 
Hedgehog Gutterbrush Clips (Pack of 20) 
Left Hand Klober Contract Dry Verge Unit Brown 
Ronseal Ultra Tough Satincoat Clear Varnish - 2.5L 
Everbuild Salt-Away Salt Remover – 5 Litre Flashing Tape
Best Sellers
-
Bond It WP100 Premium Neutral Cure Oxime Silicone Sealant – EU3
From: £7.49 Incl VAT £6.24 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Cromar Bitumen Primer – Black 1 Litre
£14.79 Incl VAT £12.33 Excl VAT Add to basket -
Thompson’s Water Seal – 5L
£22.99 Incl VAT £19.16 Excl VAT Add to basket -
Everbuild 701 Non-Slip Tile Adhesive – White 3.75kg
£4.79 Incl VAT £3.99 Excl VAT Add to basket -
Soudal Genius Gun Gap Filler Expanding Foam – 600ml
£8.99 Incl VAT £7.49 Excl VAT Add to basket -
FloPlast Half Round Gutter Union, Brown
£5.99 Incl VAT £4.99 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
