Timco FirmaHold Brad Austenitic Stainless Steel Nails - 16G x 50mm (Qty 2000) 
Cromar ProRidge Universal Ridge System 3m Kit 
Thompson's Water Seal - 5L 
Hambleside Danelaw (HD DPCA) Tile Vent Adaptor for TV10 Range 
ERidge Dry Fix Ridge System Black – 6m Kit 
Ox Tools OX Pro Aviation Snips With Holster - Right Cut (Green) 
ALM Code 7 Milled Lead - 180mm x 3m 
Bond It Expanding Foam Cleaning Fluid - Clear 500ml 
FloPlast Half Round External Stop End, White – 112mm 
Code 6 Cast Lead - 150mm x 6m 
Cromar Bitumen Primer – Black 1 Litre 
YBS SuperQuilt Lite Multi-Layer Quilted Foil Insulation, 1.5m x 10m 
OX Pro Heavy Duty Aviation Snips Right Cut (Green) 
Everbuild Multi-Use Monster Wonder Wipes Tub (500 Wipes) 
Ronseal Stays White Ultra Tough White Gloss Paint - 750ML 
Bond It PVA & Adhesive Sealer - White 500ml 
OX Pro Nylon High Vis Builders Line 105m / 350ft - Cyan 
Hambleside Danelaw CON6+ Dry Ridge 6m Kit 
Code 7 Cast Lead - 450mm x 3m 
ALM Code 8 Milled Lead - 914mm x 3m 
OX Pro Chalk Refill, White – 226g 
Ronseal Ultra Tough Satincoat Clear Varnish - 2.5L 
Roughneck® Gorilla Bar Twin Pack - 35cm & 55cm (14in & 22in) 
Ronseal Quick Drying Stain Block - Aerosol White 
Bond It Lead Pro Roofing & Flashing Sealant - Grey EU3 
Ronseal One Coat Water-Based Tile Paint - White Satin 750ml 
Colron Refined Teak Oil - 500ml 
FloPlast Half Round Running Outlet, Black Flashing Tape
Best Sellers
-
Everbuild Jetcem Rapid Repair Cement – 3kg
£12.99 Incl VAT £10.83 Excl VAT Read more -
Everbuild Everflex Contract 700T LMN Silicone – New Mahogany (Box of 25)
£125.00 Incl VAT £104.17 Excl VAT Read more -
ALM Code 6 Milled Lead Flashing- 1000mm x 6m
£509.76 Incl VAT £424.80 Excl VAT Add to basket -
OX Pro Series Bucket, Blue – 15 Litre
£6.99 Incl VAT £5.83 Excl VAT Read more -
Bond It Multi-Purpose Low Viscosity Spray Lubricant – 400ml Clear
£7.49 Incl VAT £6.24 Excl VAT Add to basket -
Timloc Double Pantile Tile Vent Terracotta (Box of 6)
£119.88 Incl VAT £99.90 Excl VAT Read more
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
