Soudal Decorators Caulk – White 290ml (Box of 24) 
ALM Code 7 Milled Lead - 240mm x 3m 
Sika Damp-Proof Slurry Grey - 25kg 
Everbuild Stixall Extreme Power – Black 290ml 
Everbuild KOS Fire Cement Buff – 1kg 
Hambleside Danelaw TV10/6 Flush Fit Tile Vent - Brown (Box of 5) 
Timco FirmaHold Collated Brad A2 Stainless Steel Nails - 16G x 50mm (2000 Pieces) 
OX Pro Nylon High Vis Builders Line 105m / 350ft - Cyan 
Code 6 Cast Lead - 390mm x 6m 
ALM Code 5 Milled Lead - 390mm x 3m 
Ronseal Expanding Foam Filler - 500ml 
Bostik Fast-Tak Permanent Adhesive - 500ml 
Ronseal Crystal Clear Outdoor Varnish - Satin 750ml 
FloPlast Half Round Union Unit - Black 
Soudal Roof & Gutter Sealant – Black 290ml (Box of 12) 
Ox Pro Ultraflex Finishing Trowel - 16" (405mm x 110mm) 
Ronseal Trade Polyurethane Satincoat Varnish - 2.5L 
Hambleside Danelaw Double Pantile Vent TV15/2 - Antique Red (Box of 5) 
Bostik Builder Tape, 50mm - 25m 
OX Trade Claw Hammer - 20 oz 
Cromar Roofing Felt Adhesive - Black 5 Litre Flashing Tape
Best Sellers
-
Code 4 Cast Lead – 600mm x 3m
£105.67 Incl VAT £88.06 Excl VAT Add to basket -
YBS SuperQuilt Lite Multi-Layer Quilted Foil Insulation, 1.5m x 10m
£132.00 Incl VAT £110.00 Excl VAT Add to basket -
ALM Code 6 Milled Lead Flashing – 600mm x 3m
£152.93 Incl VAT £127.44 Excl VAT Add to basket -
Timco Polymer Headed Pins
From: £6.99 Incl VAT £5.83 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
OX Tools OXIT Sealant & Adhesive – Black 290ml (Box of 12)
£80.04 Incl VAT £66.70 Excl VAT Add to basket -
Code 5 Cast Lead – 600mm x 3m
£131.38 Incl VAT £109.48 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
