Soudal Water Stop Roof Repair Compound – Grey 4kg 
Code 5 Cast Lead - 760mm x 3m 
Ronseal 6 Year Anti Mould Paint - White Matt 2.5L 
Easy-Trim Lead R Flashing Smooth – 450mm x 5m 
Bondit Monster Mesh Pink 50m x 1m - 160g/m2 
Everbuild Instant Nails – White 290ml 
Code 8 Cast Lead - 390mm x 3m 
Soudal Genius Gun Plasterboard Adhesive - 750ml (Box of 12) 
Everbuild Salt-Away Salt Remover – 5 Litre 
Bond It Frame-Mate Door & Window Sealant - White EU3 
Ronseal Interior Varnish - Clear Matt 2.5L 
Code 7 Cast Lead - 800mm x 3m 
Timloc Non-Profile Tile Vent Brown (Box of 8) 
ALM Code 5 Milled Lead – 650mm x 6m 
OX Pro Nylon High Vis Builders Line 105m / 350ft - Cyan 
Ronseal One Coat Blackboard Paint - Black 250ml 
Bond It D4 Professional Wood Adhesive - Clear 1L 
BOND IT Power Mix Concentrated Liquid Mortar Plasticiser - 500ml Brown 
Samac Aluminium Clout Nails - 55mm x 3.35mm (1kg) 
Soudal Silicone Spray - 400ml 
ALM Code 3 Milled Lead - 360mm x 6m 
Bond It 5 Minute PU Wood Gel Translucent 300ml - Box of 12 
Bond It Felt Adhesive - Black 1L 
Cromar Vent 3 Light Breathable Membrane - 1m x 50m (Full Pallet of 56) 
Bond It Superglue Activator Accelerator Spray Cyanoacrylate Aerosol - 200ml Flashing Tape
Best Sellers
-
Ronseal Stays White Ultra Tough White Gloss Paint – 2.5L
£28.37 Incl VAT £23.64 Excl VAT Read more -
Wakaflex Lead Alternative, Lead Free Flashing
From: £56.70 Incl VAT £47.25 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Everbuild P11 Central Heating System Cleanser – 1 Litre
£8.99 Incl VAT £7.49 Excl VAT Add to basket -
Easy-Trim Starter / Close Unit
From: £5.99 Incl VAT £4.99 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
ALUKAP-XR Ridge Channel Snap Cover, White or Brown
From: £25.48 Incl VAT £21.23 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Permavent Eco Breather Membrane 1m x 50m
£31.98 Incl VAT £26.65 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
