Gorilla Contact Adhesive Tube - Clear 75g 
Bond It Decking Oil - Natural 5L 
Everbuild Everflex 195 Siliconised Acrylic Sealant - White 300ml (Box of 12) 
Everbuild Quick Drying Clear Varnish - Gloss 750ml 
Sikabond PVA - White 5 Litre 
Everbuild STICK2® All-Purpose Contact Adhesive – 5 Litre 
Samac Aluminium Clout - 1kg (40mm x 2.65mm) 
Colron Liquid Scratch Cover - Light 14ml 
ALM Code 5 Milled Lead - 390mm x 3m 
Everbuild Patio Wizard – 1 Litre 
EVO-STIK Sticks Like All Weather Adhesive - Clear 290ml 
Restec GRPROOF 1010 Top Coat Resin - 20kg Flashing Tape
Best Sellers
-
Ronseal 10 Year Woodstain – 750ml
From: £17.99 Incl VAT £14.99 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
IKO Shed Felt – Black 8m Roll
£32.99 Incl VAT £27.49 Excl VAT Add to basket -
Spax Pozi Flat Countersunk Wirox Screws – 3.5mm Diameter (Box of 200)
From: £6.99 Incl VAT £5.83 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Easy-Trim Universal Dry Verge System – Brown (Box of 50)
£77.40 Incl VAT £64.50 Excl VAT Add to basket -
Corrapol-BT Screw Cap Fixings
From: £8.45 Incl VAT £7.04 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Bond It Aerosol Spray Adhesive 500ml Beige – Box of 12
£33.99 Incl VAT £28.33 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
