Ronseal One Coat Damp Seal - White 250ml 
Klober Flexipipe 75/100mm - (KG972400) 
ALM Code 4 Milled Lead - 1200mm x 3m 
Samac Aluminium Clout - 1kg (40mm x 2.65mm) 
Youngman Double Section Roof Ladder 4.89m (57664600) 
Easy-Trim Lead R Flashing Smooth – 600mm x 5m 
BORA - PM-4500 Speedhorse 
ALM Code 5 Milled Lead – 650mm x 6m 
Code 7 Cast Lead - 210mm x 3m 
Ronseal One Coat Water-Based Tile Paint - Magnolia Satin 750ml 
Everbuild Silicone Spray - 400ml 
Everbuild Lumberjack 5 Minute Polyurethane Wood Adhesive Liquid – 750ml 
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent - Terracotta (Box of 5) 
ALM Code 7 Milled Lead - 850mm x 6m 
Ronseal Diamond Hard Doorstep Paint - Black Satin 250ml 
ALM Code 3 Milled Lead - 150mm x 6m 
Soudal Gap Filler Expanding Foam Genius Gun 300ml - Champagne (Box of 12) 
Lead Sheet Restorer - G1 
Everbuild Weather Mate Gap Filler & Adhesive - Black 295ml (Box of 25) 
Everbuild 5 Minute Polyurethane Wood Adhesive Gel - 310ml (Box of 12) 
Bond It AS900 Acoustic Sealant White 900ml - Box of 12 
OX Pro Tuff 3 Level Kit - 600, 1200 and 1800mm 
FloPlast Half Round Union Unit - White 
Everbuild Anchorset Green 150 - Grey 150ml 
Stanley Hi-Viz Tylon 5m/Ex19mm Tape Flashing Tape
Best Sellers
-
Everbuild Quick Drying Clear Varnish – Matt 250ml
£9.99 Incl VAT £8.33 Excl VAT Read more -
Edma Repair Kit For 0320 & 0310 EDM0315
£15.05 Incl VAT £12.54 Excl VAT Read more -
Bond It Felt Adhesive – Black 1L
£12.49 Incl VAT £10.41 Excl VAT Add to basket -
Ronseal Stays White 2in1 Paint & Primer – Gloss 2.5L
£24.99 Incl VAT £20.83 Excl VAT Add to basket -
Timco FirmaHold Collated ST Brad Nails A2 SS – 18g x 5000 PCS
£21.99 Incl VAT £18.33 Excl VAT Add to basket -
Soudal Grab Solvent Based Adhesive, Beige
£6.99 Incl VAT £5.83 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
