FloPlast Square Line Gutter Angle 135° White 
Armatool Batten Gauge - Up to 14" 
Freeflow 112mm Round Gutter System 90° Gutter Angle - White 
Bond It Duct Tape - Black 48mm x 45M 
EVO-STIK Stick Like Sh*t - White 290ml 
Code 5 Cast Lead - 210mm x 3m 
Everbuild Multi-Use Wonder Wipes Tub (100 Wipes) 
IKO Super Shed Felt - Green 8m Roll 
Bond It PVA & Adhesive Sealer White 500ml - Box of 20 
Ronseal Crystal Clear Outdoor Varnish - Satin 2.5L 
Bond It Saves Nails Solvent-Free - White EU3 
Timco Metal Galvanised Insulation Discs - 35mm 
Siroflex Contractors Lead Sheet Silicone - Grey 300ml 
ALM Code 6 Milled Lead Flashing- 1000mm x 6m 
OX Trade Metric Tape Measure - 8m 
Timco Mixed Hose Clips 
ALM Code 4 Milled Lead - 1600mm x 6m 
Code 7 Cast Lead - 760mm x 6m 
FloPlast Square Fascia Bracket Black – 114mm 
Everbuild 503 SBR Bond – 5 Litre 
ALM Code 3 Milled Lead - 850mm x 6m 
Armatool Slate Guillotone 
Code 6 Cast Lead - 240mm x 3m Flashing Tape
Best Sellers
-
Ox Tools OX Pro Aviation Snips With Holster – Right Cut (Green)
£17.49 Incl VAT £14.58 Excl VAT Add to basket -
Easy-Trim Ridge F Universal Dry Ridge System – 3m Kit
£23.99 Incl VAT £19.99 Excl VAT Add to basket -
Bora Workhorse Single Piece Stand with Folding Legs PM-3350
£46.99 Incl VAT £39.16 Excl VAT Add to basket -
Bond It Monster Wipes – White 75 Wipes
£8.99 Incl VAT £7.49 Excl VAT Add to basket -
ALM Code 8 Milled Lead – 760mm x 3m
£260.54 Incl VAT £217.12 Excl VAT Add to basket -
ALM Code 5 Milled Lead – 914mm x 3m
£198.24 Incl VAT £165.20 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
