Code 3 Cast Lead - 360mm x 3m 
Bond It SBR Admixture - White 2.5L 
D4 Wood Adhesive – 1 Litre 
Timco FirmaHold Collated Brad A2 Stainless Steel Nails - 16G x 50mm (2000 Pieces) 
Soudal Decorators Caulk – White 290ml (Box of 24) 
ALM Code 8 Milled Lead - 150mm x 6m 
Code 4 Cast Lead - 360mm x 6m 
Everbuild PVCu Acti-Spray – Clear 200ml (Box of 12) 
Thompson's Emergency Instant Repair Aerosol - Black 450ml 
Samac Aluminium Annular Ring Nails - 1kg (70mm x 3.35mm) 
Hambleside Danelaw CON6+ Dry Ridge 6m Kit 
Ronseal One Coat Water-Based Tile Paint - Ivory Satin 750ml 
Everbuild P18 Gas Leak Detector - 400ml (Box of 12) 
Timloc Underlay Felt Lap Vent 
OB41 Cut Tap Drill Fluid - 400ml 
FloPlast Half Round External Stop End, Black – 112mm 
FloPlast Half Round Running Outlet, Black 
Everbuild Stick2 Industrial Superglue GP - Transparent 50g 
Timloc Telescopic Underfloor Vent 5-7 Courses 
OB41 High Performance Carburettor Cleaner - 400ml 
ALM Code 3 Milled Lead - 150mm x 3m 
Code 5 Cast Lead - 1600mm x 3m 
ALM Code 4 Milled Lead - 800mm x 3m 
Armatool 30m Longo Chalk Line 
Everbuild Evercryl One Coat Grey – 20kg Flashing Tape
Best Sellers
-
OX Trade Torpedo Level 230mm / 9in
£14.99 Incl VAT £12.49 Excl VAT Add to basket -
Timco Glazing Shovel – 260mm
£7.49 Incl VAT £6.24 Excl VAT Add to basket -
JCB Black Fast Track Boots
From: £75.92 Incl VAT £63.27 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
You Save
£1.60
Cromar Bitumen Primer – Black 5 Litre
Was:£21.50Incl VAT£19.90 Incl VAT £16.58 Excl VAT Add to basket -
Bostik Cementone Integral Waterproofer – 2.5L
£5.99 Incl VAT £4.99 Excl VAT Read more -
ALM Code 5 Milled Lead – 390mm x 3m
£84.96 Incl VAT £70.80 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
