Sikabond PVA - White 5 Litre 
Hambleside Danelaw TV15/7 Tile Vent - Terracotta (Box of 5) 
Timloc Thin Leading Edge Tile Vent Black 
Klober Profile-Line Limarech Tile Vent - Terracotta KG9859-3-0152 (Box of 10) 
Siroflex Trade Superglue Activator Spray - 400ml 
ALM Code 8 Milled Lead - 600mm x 6m 
Bond It FG8 Food Grade Silicone - White 310ml 
Ronseal One Coat Stain Block - White 2.5L 
Easy-Trim Over Fascia Vent - 25mm x 500mm (Box of 50) 
ALM Code 5 Milled Lead - 850mm x 6m 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, Brown - 300ml (Box of 12) 
Code 6 Cast Lead - 390mm x 6m 
Everbuild Everflex Premium 145 Butyl Rubber Sealant - Grey 300ml 
Soudal Mitre Kit 50g + 200ml - Clear 
Code 5 Cast Lead - 1200mm x 3m Flashing Tape
Best Sellers
-
Corrapol Rock n’ Lock Gable Flashing
From: £44.14 Incl VAT £36.78 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Axiome 16mm Triplewall Polycarbonate Sheet, Bronze
From: £49.37 Incl VAT £41.14 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Code 8 Cast Lead – 914mm x 3m
£314.16 Incl VAT £261.80 Excl VAT Add to basket -
Spax T-Star Plus Flat Countersunk Wirox Screws – 6mm Diameter (Box of 100)
From: £13.41 Incl VAT £11.18 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
ALM Code 4 Milled Lead – 390mm x 3m
£67.97 Incl VAT £56.64 Excl VAT Add to basket -
Everbuild Everflex 225 Industrial & Glazing Silicone – Black 295ml (Box of 25)
£99.75 Incl VAT £83.13 Excl VAT Read more
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
