ALM Code 8 Milled Lead - 450mm x 6m 
ALM Code 4 Milled Lead - 760mm x 6m 
Soudal Water Stop Roof Repair Compound – Grey 4kg 
Freeflow Square Gutter System Gutter 135° Angle - White 
Freeflow 68mm Round Gutter Drain Pipe 112° Branch - Black 
Easy-Trim Over Fascia Vent - 25mm x 500mm (Box of 50) 
FloPlast Half Shed Round Miniflo Water Butt Guttering Pack, Black - 14 Pieces 
FloPlast Square to Round Downpipe Adaptor - Brown 
Sika Patio Seal – 5 Litre 
Everflex Premium+ 450 Builders Silicone – Black 300ml (Box of 25) 
OX Spectrum Trade XL Mortar Raking Diamond Blade 115/22.23mm 
Siroflex Trade Superglue Activator Spray - 400ml 
Soudal Trade All Weather Sealant - Clear 290ml 
ALM Code 6 Milled Lead Flashing - 760mm x 6m 
OX Pro Mini Square Mouth Shovel 
FloPlast Half Round Square Line Gutter Adaptor - Black 
OX Pro Mortar Spike, 300mm 
Bond It Contractors PVA - 25L White 
Colron Refined Teak Oil - 500ml 
Everbuild Everflex 115 G.P Building Mastic - White 285ml (Box of 25) 
Soudal Genius Gun Pipe & Plumbing Foam – 600ml (Box of 12) 
SikaBond Waterproof PVA – 5 Litre 
Everbuild Everflex Premium+ 565 Clean Room Silicone – White 295ml (Box of 25) 
Code 4 Cast Lead - 850mm x 3m 
FloPlast Square Line Downpipe Clip White 
Everflex Galva Mate Duct Sealant - C3 
Soudal Silicone Spray - 400ml (Box of 12) 
Easy-Trim End Cap Angled - Black (Box of 10) 
Timco Professional Wire Strippers 
Soudal Firecement HT, Black - 300ml (Box of 12) 
Bond It One Hit Wonder Lightweight Filler - White 500ml 
OX Pro Tough Bucket, Blue - 15 Litre 
Code 6 Cast Lead - 600mm x 6m 
Ronseal Stays White 2in1 Paint & Primer - Satin 750ml 
Klober Plain Roof Tile Vent Adaptor - KG990500 
Soudal Mitre Kit 50g + 200ml - Clear (Box of 12) 
Ronseal Exterior Multi-Purpose Smooth Finish Filler - Grey 1.2Kg 
Everbuild Stixall Extreme Power – Clear 290ml 
Everbuild 5 Minute Polyurethane Wood Adhesive Gel - 310ml (Box of 12) 
Timloc Underlay Felt Lap Vent 
Easy-Trim Universal Dry Verge System Black (Pallet of 800) 
ALM Code 3 Milled Lead - 760mm x 3m 
Ronseal 6 Year Anti Mould Paint - White 400ml Aerosol 
OX Pro Chalk Refill, Yellow – 226g 
Timco Bulk Pallet 50 Packs - Classic Multi-Purpose Screws 4.0 x 50 Double Countersunk - A2 Stainless Steel - 200 Box 
Code 3 Cast Lead - 180mm x 6m Flashing Tape
Best Sellers
-
FreeFlow Round Gutter Drain Pipe 112° Offset Bend – White
£1.99 Incl VAT £1.66 Excl VAT Read more -
Everbuild Febond PVA – 1L
£9.49 Incl VAT £7.91 Excl VAT Add to basket -
Youngman Easiway Loft Ladder (31334000)
£141.62 Incl VAT £118.02 Excl VAT Read more -
Cromar Bitumen Primer – Black 2.5 Litre
£18.98 Incl VAT £15.82 Excl VAT Add to basket -
ALM Code 7 Milled Lead – 1000mm x 3m
£303.02 Incl VAT £252.52 Excl VAT Add to basket -
FloPlast Ogee Fascia Bracket, Black
£5.99 Incl VAT £4.99 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
