Ronseal Knot Block Primer & Undercoat - White 2.5L 
Everbuild Easi-Squeeze Flexible Decorators Filler - White 200ml 
Freeflow Square Gutter System Running Outlet - White 
Everbuild Stick2 Industrial Superglue HV – Clear 50g (Box of 25) 
Code 8 Cast Lead - 210mm x 3m 
Hedgehog Gutter Brush Leaf Guard White – 4m x 100mm 
Timloc Multi Stepped Duct Adaptor (Fits 100/110/125/150mm Duct) 
Soudal Parquet & Timber Sealant - Dark Grey 290ml 
Ronseal Precision Finish Brush - 0.5 Inch 
Klober Single Pantile Vent - Terracotta KG9860-0152 (Box of 10) 
ALM Code 6 Milled Lead Flashing - 300mm x 3m 
Ronseal Anti-Bacterial Worktop Oil - Clear 1L 
Colron Liquid Scratch Cover - Medium 14ml 
ALM Code 4 Milled Lead - 180mm x 3m 
Soudal Cartridge Gun Heavy Duty - Black 310ml 
FloPlast Square Line Pipe Connector White 
ALM Code 8 Milled Lead - 914mm x 6m 
OX Pro Aluminium Metric Rafters Square - 180mm 
Code 5 Cast Lead - 600mm x 6m 
Everbuild Salt-Away Salt Remover – 5 Litre 
Soudal Gun & Foam Cleaner Gun Grade - 500ml 
Timloc 1204 Underfloor Vent Vertical Extension + 150mm 
Timco Square Twist Nails - Galvanised (40 x 3.75mm) 1kg 
OX Heavy Duty Soft Gel Filled Knee Pad 
Klober Universal Vent 100mm Adaptor - KG968300-1 
Evercryl Emergency Roof Repair - Clear 310ml 
FloPlast Half Round External Stop End, White – 112mm 
Code 3 Cast Lead - 210mm x 3m 
Timloc Telescopic Underfloor Vent 5-7 Courses 
Samac Snowguard - 225mm x 2m 
Everbuild Stick2 Carpet Fix Spray - 500ml 
Bond It Bath Mate Bath & Kitchen Sealant - White EU3 
Uses
Bond It Bituminous paint is crafted to deliver waterproofing and overall weather protection for various surfaces, it provides an odourless and taint-free film which defends against corrosion and decay. Surfaces that are suitable for this product include;
- Steelwork
- Concrete
- Ferrous and non-ferrous metals
- Felt
- Fibre cement
- Corrugated iron
- Asphalt
- Wood
Preparation
Surfaces must be prepared before you can start application, remove any contaminants that can interfere with the bituminous paint, such as oil, dust, grease or similar impurities. Any organic growth that is present should be removed MOULD STOP as it's effective and killing and prevents further growth for months. Rust must be removed with a wire brush and treated with rust inhibitor primer.
Once you've treated the surface and given the appropriate remedial work, ensure there is no water on the surface as it can interfere with the bituminous paint.
Application
This product is supplied ready to use and shouldn't require any thinning.
- Apply using a brush, roller or spray
- Apply at least two coats giving 6 hours between each coat.
Limitations
It is not suitable to use this product when;
- In areas where solvent contact is likely
- Use for potable drinking water tanks.
- Bitumen paint can bleed through any paint applied on top of it; it is suggested that you use a primer recommended by the paint manufacturer before applying any paint on top.
