Freeflow 68mm Round Down Pipe Shoe - White 
Gorilla Super Glue Gel Twin Pack - Clear 3g 
ALM Code 4 Milled Lead - 180mm x 6m 
Ronseal Exterior Yacht Varnish - Gloss 500ml 
ALM Code 3 Milled Lead - 210mm x 6m 
Everbuild Everflex Premium 145 Butyl Rubber Sealant - Grey 300ml 
Roofer Doofer – The Ultimate Roofing Tool 
Timco Pozi C2 Strong-Fix Twin Cut Screws - 4.0mm x 40mm (Box of 200) 
ALM Code 8 Milled Lead - 1600mm x 6m 
Everbuild Febond PVA - 1L 
Bond It Aerosol Spray Adhesive - 500ml Beige 
Code 7 Cast Lead - 1200mm x 6m 
Hambleside Danelaw TV15/7 Tile Vent - Antique Red (Box of 5) 
Samac Aluminium Annular Ring Nails - 1kg (38mm x 3.35mm) 
Bond It Sealant Applicator Tool 
Code 6 Cast Lead - 300mm x 6m 
OX Trade 14 Drive Socket Set - 35 Piece 
Siroflex Trade High Viscosity Superglue - 20g 
Everbuild Bath & Kitchen Sealant - 200ml 
Ronseal Anti-Condensation Paint - Matt White 750ml 
Timloc Plain Tile Vent Terracotta (Box of 14) 
BOND IT Power Mix Concentrated Liquid Mortar Plasticiser - 500ml Brown 
Hambleside Danelaw TV15/4 Tile Vent - Brown (Box of 5) 
Bond It Monster Scrim Drywall Tape - White 48mm x 90m 
YBS SuperQuilt Lite Multi-Layer Quilted Foil Insulation, 1.5m x 10m 
Everbuild Multi-Use Giant Wonder Wipes Tub (300 Wipes) 
Everbuild Mammoth Barrier Tape - Red/White (72mm x 500m) 
ALM Code 6 Milled Lead Flashing - 300mm x 6m 
Bond It A43 Threadlock Oil Tolerant Adhesive - 25ml Blue 
Uses
The D4 Professional Wood Glue by Bond It is a premium, ready-to-use, solvent-free industrial-grade PVA adhesive that delivers an outstanding bond. Compared to conventional PVA Wood Glues, the Bond It D4 is unmatched due to its excellent water resistance, including total water immersion resistance. This product's other resistances include impact and temperature, making the D4 suitable for interior and exterior applications.
Preparation
Before commencing the application, you should prepare the surface to ensure you achieve optimal results. Remove any contaminants present, including dirt, dust, grease, oil, organic growth, etc. Cleaning the surface improves adhesion, but any mis-machined wood may produce a weaker bond.
Application
- Apply a thin layer of adhesive to one side; if a high-performance water resistance is required, apply to both sides.
- Avoiding using too much glue as this can significantly reduce the curing process
- Once the glue is applied, clamp the surface together until the adhesive is cured, which can take up to 8 hours.
- When bonding dowels, apply the glue to the hole and place the dowel into it.
Limitations and Notes
- Surfaces to be bonded cannot have a moisture content (<10%)
- This should not be used for load-bearing applications.
- Optimal temperatures for curing is 18°C-20°C, don't apply this product below 10°C
- Sand excess glue off before applying any wood stains
- Due to the nature of different woods, discolouration may occur, so a preliminary test is recommended.
