Code 4 Cast Lead - 800mm x 6m 
Ronseal Stays White Ultra Tough White Matt Paint - 2.5L 
Everbuild EuroScrim Plasterboard Tape – 48mm x 90m 
Timco 30mm Cladding Pin - 250 Pieces 
Timco Twin-Threaded Woodscrew Mixed Tray 
Everbuild Lumberjack Wood Preserver – Clear 1 Litre 
FloPlast Square Line Pipe Connector White 
Isoflex Clean Up Fluid - 500ml 
Evo-Stik Tile & Grout Adhesives - White 3kg 
Hambleside Danelaw Double Roman Tile Vent, TV15/3 - Terracotta (Box of 5) 
Hambleside Danelaw (HD PCA) Tile Vent Adaptor for TV10 range 
ALM Code 7 Milled Lead - 180mm x 6m 
Code 7 Cast Lead - 210mm x 3m 
Code 6 Cast Lead - 240mm x 3m 
Ronseal Exterior Yacht Varnish - Satin 250ml 
SEAL PRO, Low Modulus Hybrid Universal Sanitary Sealant & Adhesive Bond, White - EU3 
Timloc Plastic Insulation Retaining Discs - 80mm Red 
Everbuild Firefoam B2 Gun Grade - Pink 750ml 
ALM Code 8 Milled Lead - 180mm x 3m 
OX Pro Small Trowel - 200 x 75mm 
OX Tools 600/1200/1800mm Pro Spirit Level Set with Bag 
Bond It Aluminium Foil Tape - 75mm x 45M (Box of 16) 
Everbuild Everflex 200 Contractors LMA Silicone - Brown 295ml 
Soudal Insulating Foam Genius Gun 750ml - Champagne (Box of 12) 
Bond It Saves Nails Instant Grab Adhesive - EU3 Beige 
Uses
The Gripbond Pro Max Adhesive has outstanding properties, offering an initial grab of almost double the strength compared to most other adhesives. The typical bond strength of this product is 250Kg/m², suitable for interior and exterior application in any weather condition, this illustrates how advanced of a bond this is.
- Wood
- Metal
- Glass
- Stone
- Polystyrene
- Concrete
- Plasterboard
- Insulation board
- Ceramics
- Polyester
Preparation
Prepare the surfaces before application, and remove any contaminants that are present, this includes dust, oil and grease.
Application
- Cut the top of the cartridge without damaging the screw thread
- Screw the notched nozzle onto the top of the cartridge
- Apply to a standard sealant
- Apply directly to one of the two sides in one strip action or small beaded actions
Limitations
This product isn't recommended for application in areas immersed in water or surfaces that bleed oil or plasticiser. If the application is overhead or large mirrors, use mechanical fixing in conjunction to support it better.
Suppose the area of application is extremely large or heavy. In that case, it will need additional support to allow a complete cure to form fully. This product will not work well on polypropylene or Teflon. If you intend to paint on top of this product, test your paint on it first in an inconspicuous area with the product to see if it's compatible.
