OB41 Electrical Contact Cleaner - 400ml 
Soudal Compact Foam Gun PU Foam 
OX Trade Stubby Level - 100mm 
Soudal Parquet & Timber Sealant - Dark Grey 290ml 
Thompson's Water Seal - 2.5L 
Timco M6 Zip-Fix Cavity Wall Fixings - 10 Pieces 
ALM Code 4 Milled Lead - 240mm x 3m 
Bond It Mega Stik PU Adhesive - Beige 750ml 
FloPlast Half Round Gutter 90° Bend, Black – 112mm 
FloPlast Square Line Running Outlet White – 114mm x 65mm 
Bond It Power Frost Premium Quality Concentrate Additive - 1L Pale Blue 
Code 5 Cast Lead - 180mm x 3m 
Klober Regent Tile Vent KG6084, Dark Brown 
Hambleside Danelaw (HD PCA) Tile Vent Adaptor for TV10 range 
Timco Round Wire Nails, Pack of 40 
Bond It Economy Sealant Gun - Blue 400ml (EU3 + EU4) 
Everbuild XT44 Maintenance Spray - 400ml 
Bond It Aluminium Foil Tape - 100mm x 45M 
Code 7 Cast Lead - 360mm x 6m 
Freeflow 65mm Square Down Pipe Connector - Black 
Everbuild B1 Hand Held Expanding Fire Rated Foam - Pink 750ml (Box of 12) 
Bond It All Weather Roofing Compound - Black 2.5L 
Bond It Aluminium Foil Tape - 50mm x 45M (Box of 24) 
Everbuild External Frame Sealant - Grey 290ml (Box of 12) 
OX Tools Pro Heavy Duty Flexi Tub - 20L 
Bond It Cove-Mate Coving Adhesive - White EU3 
Uses
Bond It Bituminous paint is crafted to deliver waterproofing and overall weather protection for various surfaces, it provides an odourless and taint-free film which defends against corrosion and decay. Surfaces that are suitable for this product include;
- Steelwork
- Concrete
- Ferrous and non-ferrous metals
- Felt
- Fibre cement
- Corrugated iron
- Asphalt
- Wood
Preparation
Surfaces must be prepared before you can start application, remove any contaminants that can interfere with the bituminous paint, such as oil, dust, grease or similar impurities. Any organic growth that is present should be removed MOULD STOP as it's effective and killing and prevents further growth for months. Rust must be removed with a wire brush and treated with rust inhibitor primer.
Once you've treated the surface and given the appropriate remedial work, ensure there is no water on the surface as it can interfere with the bituminous paint.
Application
This product is supplied ready to use and shouldn't require any thinning.
- Apply using a brush, roller or spray
- Apply at least two coats giving 6 hours between each coat.
Limitations
It is not suitable to use this product when;
- In areas where solvent contact is likely
- Use for potable drinking water tanks.
- Bitumen paint can bleed through any paint applied on top of it; it is suggested that you use a primer recommended by the paint manufacturer before applying any paint on top.
