Easy-Trim Over Fascia Vent - 10mm x 1m 
Everbuild Heat Mate Silicone Sealant - Red 295ml (Box of 12) 
Everbuild Everflex 195 Siliconised Acrylic Sealant - White 300ml (Box of 12) 
Timloc Single Pantile Tile Vent Terracotta (Box of 11) 
Over Fascia Vent, 25mm Single 
Ronseal Ultra Tough Satincoat Clear Varnish - 5L 
Everbuild Professional Sealant Gun – C4 (290 - 380ml) 
Bond It SBR Admixture - White 2.5L 
Standard Brush 4-Inch 
Everbuild KOS Black Fire Cement - 500g 
Samac Silicone Bronze Nails - 1kg (31mm x 1.8mm) 
Samac Stainless Steel Cladding Pins - 30mm x 2.0mm (Box of 250) 
Bond It Contractors PVA - 2.5L White 
Formulated with reliability and performance in mind, the Bond It Felt Adhesive 25L is the go-to choice for tradesmen and D.I.Y enthusiasts. The black colour of the paint delivers a discreet, professional finish with a robust and long-lasting bond that can withstand a variety of weather conditions.
Preparation
All surfaces must be clean and dry. They must be free from grease, oil and loose material. Ensure to remove any organic growth using a fungicidal wash like MOULD STOP. Dusty and porous surfaces should be primed with BITUMEN PRIMER. If possible, the felt to be laid should be cut to size and positioned for 24 hours to assist with the application. To avoid thickening in cold weather, store the FELT ADHESIVE overnight in a warm room before use.
Application
- Use a brush, mop or squeegee when applying this product
- Apply it directly to the surface to be bonded
- Take note that coverage depends on how thick it's applied to the surface
