FloPlast Half Round Gutter Union, White 
Bond It The Beast PU Adhesive - Brown 250ml 
Restec Flexitec 2020 Roofing Kit - (10m²) 
Everbuild Stixall Extreme Power – White 290ml 
OX Pro Heavy Duty Aviation Snips Straight Cut (Yellow) 
Timco Pozi C2 Strong-Fix Twin Cut Screws - 4.0mm x 40mm (Box of 200) 
Code 4 Cast Lead - 600mm x 3m 
Code 7 Cast Lead - 150mm x 3m 
Everbuild Maximum Torque - White 290ml 
Everbuild Mortar & Tile Grout Pro Pointing Gun Kit 
Bulk pallet 125 packs - Classic Multi-Purpose Screws 4.0 x 50 Double Countersunk - A2 Stainless Steel - 200 Box 
Thompson's Water Seal - 1L 
Code 6 Cast Lead - 450mm x 6m 
Bond It The Beast PU Adhesive - Brown 150ml 
Everbuild Plumbers PVC Pipe Cement - Clear 250ml (Box of 12) 
Everbuild Stick2 Industrial Superglue GP - Transparent 20g 
Code 8 Cast Lead - 210mm x 3m 
Everbuild Tarmac Restorer - 5 Litre 
Everbuild Black Jack 903 Bitumen Trowel Mastic – 2.5 Litre 
Everbuild PVCu Acti-Spray – Clear 200ml (Box of 12) 
Thompson's One Coat Patio & Block Paving Seal - 5L 
Bond It Economy Sealant Gun - Blue 900ml 
OX Pro Chalk Refill, White – 226g 
Uses
Powder Filler by Bond It offers outstanding properties for internal domestic use, perfect for various substrates, it has features such as being painted over and drilled into whilst retaining its durable, long-lasting qualities. Once applied onto the wall, this product's reliable adhesive properties prevent it from slumping. It can be sanded down afterwards to offer a smooth flush finish that's perfect for wallpaper to be applied onto.
Preparation
You must prepare the surfaces prior to application; complete this by removing contaminants that can hinder the product's adhesion, including dust and loose materials. You must enlarge the crack slightly to apply a deep repair if the crack is a hairline.
Mixing
You should only mix enough to last around 40 minutes. Mix both the powder filler with water, using the ratio of 2.5 parts filler to 1 part cold clean water, it will mix into a stiff paste, if the crack or hole is deep the mix can be thickened.
Application
- Using a trowel or filling knife
- Scoop the stiff paste and press it firmly into the area
- Fill the gap and smooth it down
- Let it dry and after it's dried, sand down any uneven areas so that it becomes flush
Drying Times
It depends on the environment around, the substrate and the thickness of the filler.
