ALM Code 4 Milled Lead - 1200mm x 3m 
Soudal Trade PU Construction Adhesive - Beige 290ml 
Bond It Aluminium Foil Tape - 75mm x 45M (Box of 16) 
OX Tools Winter Set - Beanie, Socks, Thermal Gloves 
Everbuild EB25 Ultimate Sealant & Adhesive – Anthracite 300ml (Box of 12) 
Siroflex Contractors Lead Sheet Silicone - Grey 300ml 
ALM Code 7 Milled Lead - 850mm x 3m 
OX Pro Jab Saw - 6.5" / 165mm & Holster Pack 
Bond It Paving & Patio Seal - Clear 25L 
Sikabond PVA - White 5 Litre 
Ronseal Anti-Bacterial Worktop Oil - Clear 1L 
Everbuild General Purpose Silicone - Brown 290ml (Box of 12) 
Everbuild 701 Non-Slip Tile Adhesive – White 7.5kg 
Over Fascia Vent, 10mm 
Soudal 5 Minute D4 Wood Adhesive Liquid – 750g (Box of 12) 
Freeflow 112mm Round Union Gutter Bracket - White 
OX Pro Magnetic Level 600mm 
Timloc Underlay Felt Lap Vent (Box of 50) 
OX Pro Mini Square Mouth Shovel 
Everbuild 402 Waterseal – 25 Litre 
OX Pro Tile Nippers 200MM / 8" 
Timloc 3014C Over Fascia Ventilation System 1M - Black 
How to Apply Aluminium Solar Protector by Bostik
Before starting, take care when opening the lid. To obtain a uniform colour, mix contents thoroughly into the bottom of the drum before using for 10 to 15 minutes. Do not thin the product. Apply immediately and continue stirring periodically during use. Where possible we recommend using disposable brushes for the application of Bostik Aluminium Solar Protector for Roofs. Apply two thin coats of Bostik Aluminium Solar Protector for Roofs by brush or mohair roller. When brushing, use soft bristle brushes applying the lightest pressure. The second coat should be applied as soon as the first coat is dry.
When applying over recently coated bituminous surfaces, allow the following minimum times to elapse after the final coat has dried before applying Bostik Aluminium Solar Protector for Roofs: Hot applied coatings: 24 hours Solvent-based coatings: 3 days Water-based coatings: 14 days Over bituminous surfaces, use the thinnest coat necessary to fully cover the black colour of the bitumen underneath. The second coat should also be thin and placed at right angles to the first. Avoid the formation of pools. When applying to large areas on bright days it is advisable to wear polarized sunglasses to reduce glare.
