Soudal Repair Express Plaster - White 900ml 
Code 3 Cast Lead - 1600mm x 6m 
Ronseal One Coat Water-Based Tile Paint - Black Gloss 750ml 
Bond It Cove-Mate Coving Adhesive - White EU3 
Timloc 1204 Underfloor Vent Vertical Extension + 150mm 
Everbuild PVCu Solvent Cleaner – 1 Litre 
Code 4 Cast Lead - 800mm x 6m 
Timco 6pcs Stubby Screwdriver Assorted Set 
Everbuild Pinkgrip Dryfix FR – 750ml 
Kwik Flash Lead Tool - Turn In Setting Tool For Lead & Zinc Flashing 
Easy-Trim Universal Dry Verge System Black (Box of 50) 
OX Pro Brick Hammer - 24 oz 
Bond It Mirror Pro Adhesive - White EU3 
Freund Mastercut Natural Slate & Man Made Slate Cutter with Hole Punch 
Everbuild 503 SBR Bond – 5 Litre 
Everbuild Everflex Premium 145 Butyl Rubber Sealant - Grey 300ml 
OX Pro Tuff Rule - Cyan 
Timloc 1205 Underfloor Vent Horizontal Duct Adapter - 110mm 
ALM Code 6 Milled Lead Flashing - 850mm x 6m 
Everbuild Heat Mate Silicone Sealant - Red 295ml (Box of 12) 
Klober Adaptor For 20K Vents - KG979700 
OX Pro Chalk Refill, Blue - 226g 
Ronseal 3 in 1 Basecoat - White 2.5L 
Ronseal Garden Paint - Pink Jasmine 750ml 
Left Hand Klober Contract Dry Verge Unit Brown 
Code 8 Cast Lead - 1600mm x 6m 
Gorilla Wood Glue - Brown 532ml 
Everbuild Everflex Mirror Mate Adhesive - White 290ml (Box of 12) 
Easy-Trim Ridge F Universal Dry Ridge System - 3m Kit 
ALM Code 3 Milled Lead - 1600mm x 6m 
OB41 Multi-Use Brake Cleaner - 400ml 
Soudafoam Window & Door Hand Held - 750ml 
Everbuild Multi-Use Wonder Wipes Spray – 1 Litre 
Uses
The 402 WaterSeal by Everbuild is the ultimate water-resisting product that's specially formulated for protecting various surfaces. The Everbuild team crafted this product using a high-performance composite that doesn't contain any solvents. This creates a more user-friendly product as it's non-flammable and won't harm the user or the organic life in the environment. It achieves its protection by penetrating deeply into the surface, providing effective water repellence for many years to come, resisting UV light.
Preparation
The surface has to be prepared to achieve optimal results, starting by checking if it's sound and stable. After checking it, clean it by removing any contaminants that can interfere with this product, including dirt, dust, oil, grease, etc.
Application
- Shake well before applying; you can use this to damp surfaces but not wet.
- Apply to the surface using either a low-pressure (garden spray), brush or roller.
- Ensure the surface is fully saturated on vertical surfaces, working from the bottom up.
- When treating horizontal surfaces, flood the entire area and then, after 10 minutes, spread it out using a roller, mop or soft brush, ensuring the whole surface is covered.
- Two coats are recommended for optimal results, applying the second within 1 hour after the first when the surface has soaked the first coat but is still wet.
- Any tools used can be cleaned immediately after use using warm water.
Limitations and Notes
- This product should not be applied in temperatures below 10°C
- This should not be applied when it rains or if rainfall is imminent.
- Do not apply to painted surfaces.
- When applying the second coat, ensure the first one hasn't dried; otherwise, you may prevent penetration properties from being fully optimised.
- This should not be applied to wood, rubber or plastic.
- Do not use this product in fishponds.
- Do not prepare the area using detergents to clean the area as this can significantly affect the beading effect property.
