Bond It A70 Studlock Anaerobic High Strength Adhesive - 50ml Green 
Everbuild Stixall Extreme Power – Grey 290ml 
Everbuild 402 Waterseal – 25 Litre 
Armatool Mop Heads Size 12 
Soudal Grip All Solvent-Based - 290ml 
Code 7 Cast Lead - 450mm x 3m 
ALM Code 7 Milled Lead - 210mm x 3m 
Bond It B1 Fire Resistant PU Gun Grade Expanding Foam - Pink 750ml 
Bond It A70 Studlock Anaerobic High Strength Adhesive - 25ml Green 
ALM Code 8 Milled Lead - 1600mm x 3m 
Right Hand Klober Contract Dry Verge Unit Grey 
Freeflow 112mm Gutter Internal Stop End - Black 
Bond It PVA & Adhesive Sealer White 1L - Box of 12 
Bond It Caulk-Mate One Hour Decorators Caulk - White EU4 
Code 5 Cast Lead - 914mm x 6m 
Everbuild Everflex Lead Mate Sealant Grey - 295ml (Box of 25) 
Ronseal 6 Year Anti Mould Paint - White 400ml Aerosol 
Everbuild Lead Mate Patination Oil – 1 Litre 
ALM Code 3 Milled Lead - 450mm x 6m 
Everbuild No Waste Foam – 750ml 
Code 6 Cast Lead - 760mm x 3m 
ALM Code 5 Milled Lead - 450mm x 6m 
Timloc 5" Aero Core with Cowl & Baffle Terracotta 
Uses
The 406 Stabilising Solution by Everbuild is a high-quality, potent product that provides excellent sealing and bonding properties for badly weathered, chalky and dusty surfaces. It is crafted to restore these surfaces, prepare them for subsequent application, and allow you to decorate the area further. This effective stabiliser can be applied to;
- Brick
- Stone
- Render
- Concrete
- Plaster
- Pebbledashing
- Stucco
Preparation
Prepare the surface by removing all contaminants that can interfere with the stabiliser; this includes dirt, dust, oil, grease, etc. You must use a mould killer to eliminate the spores if you have any organic growth. Any flaking material should be brushed away using a stiff brush, creating a sound surface. Any signs of penetration damping should be treated first, and after finishing the preparation, the surface must be touched dry.
Application
This product is ready to use, please do not dilute it.
- Apply using a brush in one liberal coat
- If the surface is extremely porous, apply a second coat when the first dries
- Drying times are between 2 -4 hours, depending on the temperature and humidity.
Limitations and Notes
- As mentioned above, this product is ready-to-use and doesn't require any dilution.
- Dispose of any product and packaging correctly. Do not allow it to reach watercourses.
- This product cannot restore badly disintegrated render, rubber, etc. This will require removing and subsequent re-application
- Do not apply this product below 5°C.
- Do not apply this product externally if rain is imminent or due to fall within 6 hours.
