Everbuild Pinkgrip SF But It’s White – 380ml (Box of 12) 
Ulti-Mate Stonewold MkII Roof Tile Vent - Brown 
Everbuild Gun A Nail Standard – White 310ml (Box of 25) 
Klober Boll Roll Tile Vent KG6085, Brown 
ALM Code 7 Milled Lead - 760mm x 3m 
Everbuild Roof & Gutter Sealant – Black 295ml 
Soudal Soudafoam Window & Door Gun Grade – 750ml 
Everbuild Everflex AquaMate Aquarium Sealant – Translucent 295ml (Box of 12) 
Timloc Over Fascia Vent - 1m 
Everbuild Tecnic Foil Pack Gun 
Everbuild Everflex Lead Mate Sealant Grey - 295 ml 
Ronseal Stays White One Coat Non-Drip Paint - Matt 750ml 
Everbuild Clear Fix – 290ml 
Everbuild Forever Ivory Silicone Sealant – 295ml 
Easy-Trim Universal Dry Verge System Terracotta (Box of 50) 
Code 4 Cast Lead - 360mm x 6m 
Everbuild Triple Action Wood Treatment – 2.5 Litre 
Klober Uni-Plain Roof Tile Vent Adaptor & Flexipipe - KG992800 
OX Pro Mini Square Mouth Shovel 
Bond It Glass Cleaner - Clear 1L 
Timloc InvisiWeep Extension Tube - 500mm Clear 
Everbuild Black Jack 906 Bitumen Roofing Emulsion – 5 Litre 
Timloc Double Pantile Tile Vent Brown (Box of 6) 
Bond It Duct Tape - Silver 48mm x 45M 
Bond It B3 Fill And Fix Expanding Foam Gun Grade - Beige 750ml 
Uses
The 502 All Purpose Weatherproof Wood Adhesive By Everbuild is the perfect wood adhesive for all woodworking, joinery, furniture assembly and general household DIY applications. It's formulated with a water-based composite, making it an environmentally friendly product, delivered with a transparent, fast cure. A unique feature of this product is its suitability for curing through radio frequencies.
Preparation
Before commencing the application, check the wood to ensure it's in good health. Any signs of wet or dry rot must be removed and replaced or treated, and you can use the Ronseal Wet Rot Hardener if you would like to treat it before replacing it.
Application
- Apply a thin layer of adhesive to both surfaces and over-applying the glue will slow curing times
- Clamb surfaces together until the adhesive is dry, which can take up to 8 hours.
- When fitting dowels, the adhesive should be applied to the holes.
Limitation and Notes
- This product is not suitable for application in constant water immersion.
- Ensure wood doesn't contain excessive moisture (<15)
- Do not use at temperatures below 10°C
- Clean any excess adhesive by using a damp cloth during the clamping process before the glue has cured.
- Before staining or sanding, sand any excess glue off the wood.
- Ensure sufficient clamping pressure during curing, which is especially important with radio frequency bonding.
- It can be used with laminate strips, but it is not suitable for large areas of laminate.
- If applying this product externally, it's essential to protect all glue joints with an impervious paint system.
