Everbuild General Purpose Silicone - White 280ml (Box of 12) 
Ronseal Exterior Yacht Varnish - Gloss 1L 
Code 4 Cast Lead - 390mm x 6m 
Everbuild 209 Liquid Mortar Tone - Black 5 Litre 
Soudal Lead Sheet Sealant 290ml - Grey 
Code 6 Cast Lead - 150mm x 6m 
ALM Code 5 Milled Lead - 180mm x 3m 
Everbuild One Strike Filler - White 2.5L 
Soudal Butyrub Non-Setting Mastic - Grey 300ml 
Everbuild Silicone Eater Silicone Sealant Remover - 100ml 
Everbuild Everflex Pyro Mate Fire Rated Silicone – White 295ml (Box of 12) 
Bond It PVA & Adhesive Sealer - White 500ml 
Timco Firmahold Hammer Tacker 
ALM Code 3 Milled Lead - 760mm x 3m 
Cromar Cold Gritting Solution - Black 25 Litres 
Ronseal Ultra Tough Mattcoat Clear Varnish - 2.5L 
ALM Code 4 Milled Lead - 600mm x 3m 
Timco Velocity Premium Multi-Use Screws - Mixed Tray 
Bond It Monster Wipes - White 75 Wipes 
Ronseal One Coat Damp Seal - White 250ml 
Timloc Double Pantile Tile Vent Brown (Box of 6) 
Everbuild 506 Universal Contractors PVA - 5Kg White 
Ronseal Ultra Tough Hardglaze Clear Varnish - 750ml 
Uses
This Everbuild All Purpose Ready Mixed Filler is essential for any D.I.Y enthusiast or Tradesman looking to repair various surfaces. This product dries to a smooth but tough, crack-resistant sandable finish, allowing you to perfectly repair a hole to a flush finish. This product is suitable for internal and external use, offering various areas of applications; this product is suitable for surfaces such as;
- Plaster
- Brick
- Wood
- Stone
- Render
Preparation
You must prepare all surfaces correctly to achieve a good key and optimal adhesion. Remove any dust, oil, dirt, grease or similar contaminants, cover any nail or screw heads with oil-based paint and allow to dry.
Application
- Stir well before use and apply directly from the tub into the filling area.
- This product can fill a gap with a maximum depth of 9mm. If you want to fill a more significant depth, apply in layers and allow 1 hour between each layer so it can fully cure.
Limitations
- Do not use to fill plastics or metals.
- This product is unsuitable to be applied when rain is imminent or within 5 hours of application.
- Do not apply in temperatures below 5°C.
- Not suitable for repairs in permanently wet areas
- Do not apply more than 9mm depth per application. (e.g. if the gap is 27mm deep, it will take 3 coats at 9mm depth each with an hour between each one)
