Easy-Trim Universal Dry Verge System - Brown (Box of 50) 
Soudal Multi Cleaner - 400ml 
ALM Code 5 Milled Lead - 1000mm x 3m 
Samac Hall Hooks - (Bags of 10) 
Siroflex Trade Superglue Activator Spray - 400ml 
Samac Aluminium Clout Nails - 50mm x 3.35mm 10kg Box 
Thompson's One Coat Waterseal - 5L 
Bond It All Weather Roofing Compound - Black 5L 
Everbuild Clear Fix – 290ml (Box of 12) 
Soudal Trade Gun and Foam Cleaner - 500ml 
Evo-Stik Gripfill Gap Filling Adhesive – 350ml 
Klober Single Pantile Vent - Slate Grey KG9860-0429 (Box of 10) 
Azpects EASYSeal Sandstone Enhancer and Sealer 5L 
ALM Code 3 Milled Lead - 1200mm x 6m 
Soudal Manual Foil Pack Gun Aluminium, 600ml (Sealant Gun for Sausages) 
Everbuild Mammoth Barrier Tape - Red/White (72mm x 500m) 
Everbuild KOS Black Fire Cement - 1kg 
Thompson's Emergency Roof Seal - Black 1L 
Bostik Flashband Self Adhesive Flashing Tape – Grey 3.75m x 75mm 
Cromar Black Bitumen Paint – 1 Litre 
Ronseal Multi Purpose Filler Smooth Finish Powder - 2Kg 
Code 4 Cast Lead - 1600mm x 6m 
OX Trade 4 Piece Spirit Level Set - 230, 600, 1200 & 1800mm 
Soudal Lead Sheet Sealant 290ml - Grey (Box of 12) 
ALM Code 6 Milled Lead Flashing - 800mm x 6m 
Everbuild Stick2 Hard Plastic Adhesive - 30ml 
SEAL PRO, Low Modulus Hybrid Universal Sanitary Sealant & Adhesive Bond, White - EU3 
Everbuild Showerproof Bathroom Silicone - Clear 280ml 
Code 6 Cast Lead - 390mm x 3m 
Siroflex Trade Strength Glue Screws SF Adhesive 
Code 8 Cast Lead - 450mm x 3m 
OX Tools Trade Bucket, Black - 15 Litre 
Klober Universal Tile Vent Brown KG9854 (Box of 10) 
Sika Mould Buster – 5 Litre 
Uses
The Black Jack 906 Roofing Emulsion by Everbuild is a unique water and bitumen-based emulsion that provides excellent waterproofing for roofs and provides outstanding protection against the corrosion of pipes and structural steelwork. Applications that this product is used in include general waterproofing of roofs, metal protection and insulation. The way this product aids in insulation is due to the 906's ability to provide a vapour barrier, perfect for cold storage rooms, mushroom houses and similar installations.
Preparation
It's essential to properly prepare the area before applying the 906. You should clean the surface, removing any contaminants that can hinder the adhesion; these include dirt, oil, dust, grease, etc. Any organic growth present needs to be removed correctly. The best way to achieve this is to use a dedicated mould killer, saturate the area, allow it to die and wipe the surface clean. Any porous surface will require a roofing primer applied to the surface and allowed to dry thoroughly before applying the 906 on top. It's crucial to complete any remedial work to the surface before applying; significant gaps, unsound structures or surface damage will hinder this product.
Application
- Open the tin and stir it thoroughly
- Apply using a brush working at a rate of ¾ of a litre per square metre.
- Apply the coats at right angles to each other and allow 24 hours between coats
- You should apply at least two coats to achieve optimal results
Optionally, you can extend the life of the 906; applying an overcoat such as solar reflective paint can achieve this.
Limitations
- Do not apply when rain is imminent.
- Protect from rain and frost until cured. To understand if it's cured, wet a finger and rub it over the surface, and if it doesn't produce a brown stain, it's cured.
- Do not use in areas where subsequent solvent contact is likely.
- This product may bleed through any paint applied over it. If you want to paint over it, you should contact the paint manufacturer that you want to overcoat to check compatibility.
