Siroflex Trade Strength Medium Viscosity Superglue - 20g 
ALM Code 6 Milled Lead Flashing - 360mm x 3m 
Soudal Fix ALL Turbo - Grey 290ml (Box of 12) 
Soudal Construction Silicone, Grey - 290ml (Box of 12) 
Everbuild Black Jack 903 Bitumen Trowel Mastic – 2.5 Litre 
FloPlast Rafter Bracket Top Fix 
Soudal Repair Express Plaster - White 900ml 
Siroflex Trade Superglue Activator Spray - 200ml 
Bostik Brushable Waterproofer - Black 5L 
Everbuild 408 Super Seal - 5 Litre 
OX Pro Brick Carrier 
Code 8 Cast Lead - 914mm x 6m 
Everbuild Weather Mate Gap Filler & Adhesive - Black 295ml (Box of 25) 
Soudal Trade Roof & Insulation Expanding Foam Genius - 600ml (Box of 12) 
Freeflow 68mm Round Down Pipe Shoe - White 
Ronseal Crystal Clear Outdoor Varnish - Satin 2.5L 
Timloc 1204 Underfloor Vent Vertical Extension + 150mm 
Code 7 Cast Lead - 800mm x 3m 
Timco Straight Tower Bolt Black 6" Gate Bolt 
ALM Code 3 Milled Lead - 150mm x 6m 
Soudal PVCu Gap Filler, White - 300ml (Box of 12) 
Code 3 Cast Lead - 450mm x 6m 
Soudal Parquet & Timber Sealant - Dark Grey 290ml 
Code 6 Cast Lead - 450mm x 6m 
Code 5 Cast Lead - 360mm x 3m 
Everbuild Flexible Decorators Filler – 290ml (Box of 12) 
Soudal Insulating Foam Genius Gun 750ml - Champagne 
ALM Code 8 Milled Lead - 300mm x 3m 
OX Pro Tough Nylon Braided Builders Line 105m / 350ft - Cyan 
Siroflex Trade Hand Held PU Expanding Foam 
Code 4 Cast Lead - 300mm x 3m 
Everbuild Lumberjack 30 Minute PU Wood Adhesive Liquid – 750ml (Box of 12) 
Uses
The Everflex 200 LMA Silicone by Everbuild is formulated with an acetoxy, an anti-fungal compound, delivering a product that provides fantastic weathering properties and resistance. The anti-fungal compound offers the most helpful resistance when applied in high-humidity areas or outside because it is impervious to black mould, mildew or the growth of bacteria. Application this product is typically applied in include;
- Sealing around aluminium and metals
- Sealing around showers, baths, basins and other sanitary ware
- As an adhesive for fixing PVCu trims, cladding and panels
- Pointing around door and window frames
- Sealing around work worktops and laminates
- General draughtproofing
- Aluminium gutter sealing
Preparation
If you're applying this to areas with a large gap, you can reduce the joint depth using a backing rod, which will help save on wastage and offer a stronger bond. Before starting any application, you should prepare the surface by removing any contaminants that can hinder the adhesion; this includes dirt, dust, oil, grease, etc.
Application
- Cut the cartridge's tip, ensuring not to damage the threaded screw.
- Cut the nozzle at a 45° angle, and screw it onto the top of the cartridge.
- Place the cartridge into a sealant applicator tool/gun and point the tip to the area you plan to seal.
- Using a continuous singular motion, apply even pressure to the handle, extruding the sealant to the surface in one application.
- After applying the sealant, you should smooth it down in 15 minutes. You smooth it using a sealant tool or a soapy, wetted wooden spoon/spatula.
Limitations
- This product is not suitable for use in manufacturing aquariums
- Do not use this product in conjunction with bitumen or asphalt
- With highly porous surfaces such as new concrete, priming is suggested to optimise adhesion
- Do not use on substrates that may bleed oils, solvents or plasticisers
- Do not apply or in the vicinity of double-glazed units
- When applying to PVCu, priming is recommended
- Don't apply to soft metals such as lead or brass.
