Name: Everbuild Everflex Contract 700T LMN Silicone - Caramel (Box of 25)
SKU: 700TCA25
Availability: OutOfStock

Uses

This 700T Silicone by Everbuild is excellent for perimeter pointing internally and externally, with its robust, durable adhesive compatible with PVCu, wood and plastic, ensuring a secure bond on various application areas, one of the being window frames. The formula inside the 700T allows it to work well as a sealant for expansion joints and soft metals such as lead, copper and zinc.

Some of the surfaces that this product can adhere to are;

PVCu
Wood
Plastic
Lead
Copper
Zinc
Plastic

Preparation

Ensure you properly prepare the surface before commencing the application and remove dirt, dust, oil, grease or other contaminants that can hinder the adhesion of this product.

If the application area is plastic, you should test the product's compatibility with the plastic in a small area before completing the full project, as different plastic react differently to this product.

To enhance adhesion to PVCu, you should prime it by wiping it with PVCu Solvent Cleaner or White Spirits (If painted, this doesn't include enamel paints, as the white spirit will strip the paint off)

This product should adhere to most surfaces. However, with the few that it doesn't, you must apply a primer first; if unsure, you can always test first in a small inconspicuous area.

Application

Cut the top of the cartridge, ensuring you do not damage the threaded screw.
Screw the nozzle onto the cartridge, and cut the nozzle at a 45° angle with an opening slightly larger than the area to be filled.
Apply to the area, using a firm, even pressure on the gun to ensure an even bead is applied to the space creating a secure bond.

Limitation

This product is not suitable to be used on bitumen, asphalt, neoprene and certain organic elastomer
This product should not be used in the manufacturing of an aquarium
Substrated that bleed oils, solvents or plasticisers are not suitable areas of application for this product
This product is not suitable for paints to be applied over
Not suitable for bedding

Additional information

Storage Conditions	Store in original unopened containers between +5 °C and +25 °C
Density	ca. 1.35 g/cm³
Shore A Hardness	20 to 30
Modulus of Elasticity in Compression	<0.4 MPa
Movement Capability	25 % (ISO9047)
Yield	10.5 Linear metres for a 6 mm diameter bead
Sagging	<3 mm (ISO7390)
Curing Rate	1 mm per 24 hours
Skin Time	5 – 25 minutes.
Joint Design	Maximum depth 50 % of joint width; movement capacity will be impaired if the depth of the joint is greater than the width. For maximum movement accommodation, it is recommended that: 1. The joint depth should be no less than 5 mm 2. Joint depth should be 5 mm for joints up to 10 mm wide Joints above 10 mm in width should be half the width in depth up to 20 mm 3. For deep joints, reduce depth by using Fix and Fill Expanding Foam or a suitable joint backer rod. All joints should be designed so that the seal is placed in a position which does not retain water or form a water trap. Triangular fillets should be no less than 12 mm across the face and should be finished with a flat or convex face.

Technical Data Sheet

Safety Data Sheet

Storage Conditions

Store in original unopened containers between +5 °C and +25 °C

Density

ca. 1.35 g/cm³

Shore A Hardness

20 to 30

Modulus of Elasticity in Compression

<0.4 MPa

Movement Capability

25 % (ISO9047)

Yield

10.5 Linear metres for a 6 mm diameter bead

Sagging

<3 mm (ISO7390)

Curing Rate

1 mm per 24 hours

Skin Time

5 – 25 minutes.

Joint Design

Maximum depth 50 % of joint width; movement capacity will be impaired
if the depth of the joint is greater than the width. For maximum movement
accommodation, it is recommended that:
1. The joint depth should be no less than 5 mm
2. Joint depth should be 5 mm for joints up to 10 mm wide
Joints above 10 mm in width should be half the width in depth up to 20
mm
3. For deep joints, reduce depth by using Fix and Fill Expanding Foam or a
suitable joint backer rod.
All joints should be designed so that the seal is placed in a position which
does not retain water or form a water trap. Triangular fillets should be no
less than 12 mm across the face and should be finished with a flat or convex
face.

FREE Next Working Day Delivery on Orders over £10*

Everbuild Everflex Contract 700T LMN Silicone - Caramel (Box of 25)

Uses

Preparation

Application

Limitation

Additional information

Technical Data Sheet

Safety Data Sheet

Product Information

Technical Data Sheet

Safety Data Sheet

Related Products

Gorilla Contact Adhesive Tube - Clear 75g

Bond It Build-Mate Building Mastic - EU3

Klober Profile-Line Twin Plain Tile Vent - Brown KG9861-0247 (Box of 10)

Recommended products

Easy-Trim Universal Dry Verge Unit – Black

Bond It Lightweight Render Mesh – 50m x 1m (Pink)

Cromapol Acrylic Roof Coating – 20kg

Get new offers to your inbox.