Ronseal One Coat Stain Block - White 2.5L 
Klober Profile-Line Twin Plain Tile Vent - Brown KG9861-0247 (Box of 10) 
Permavent Black Breather Membrane – 1m x 50m 
Everbuild Wet Rot Wood Hardener – 250ml 
Soudal Solvent-Free Trade Grab Adhesive - White 290ml 
Samac Stainless Steel Cladding Pins - 30mm x 2.0mm (Box of 250) 
Everbuild Bath & Kitchen Sealant – White 290ml 
Bond It The Beast PU Adhesive - Brown 500ml 
Everbuild Industrial Superglue HV - Clear 50g 
Everbuild Black Jack 901 Black Bitumen Paint – 5 Litre 
Code 4 Cast Lead - 1000mm x 6m 
ALM Code 5 Milled Lead - 600mm x 6m 
Timco Screwdriver 6-Tool Set 
Bond It PVA & Adhesive Sealer - White 1L 
Everbuild Standard Nozzle - 6 Pack (290mm & 310mm) 
Everbuild Coving Adhesive & Joint Filler - 290ml 
Ronseal One Coat Wood Primer & Undercoat - White 750ml 
Soudafoam Gap Filler Gun Grade – 750ml (Box of 12) 
Everbuild Lumberjack 5 Minute PU Wood Adhesive Gel – 310ml 
Code 8 Cast Lead - 150mm x 6m 
Everbuild Salt-Away Salt Remover – 5 Litre 
Uses
The Mammoth Heavy Duty Double-Sided Tape by Everbuild is the ultimate double-sided tape. Delivered with a thick cloth membrane and strong adhesive resin, it's perfect for fixing floor coverings and securing items to surfaces both vertically and horizontally. Due to its high tack adhesive, care must be taken when applying it as it will attach to anything!
Preparation
Before applying the tape to the surface, it's important to clean the surface, removing impurities that can hinder the adhesion; this includes dirt, dust, oil, grease, etc.
Application
- Remove the outer packaging from the roll of tape.
- Peel some of the tape, apply it to the surface and continue applying it as you unravel the tape.
- Peel the protective film from the top and place your other surface on top, pressing firmly into place.
Limitations
- This product is not suitable for surfaces that bleed oils or plasticisers.
