Everbuild Lumberjack 30 Minute Polyurethane Wood Adhesive Gel – 310ml 
OB41 Silicone Lubricant Spray 400ml 
Colron Refined Teak Oil - 500ml 
Ronseal Multi Purpose Smooth Finish Filler - 330g 
Thompson's One Coat Damp Seal - White 250ml 
Bond It Trowel Mastic - Black 1L 
Bond It PVA & Adhesive Sealer - White 500ml 
IKO Easymelt Bonding Bitumen Keg - 10kg 
FloPlast Half Shed Round Miniflo Water Butt Guttering Pack, Black - 14 Pieces 
Everbuild 501 PVA - 2.5 Litre 
Bond It Bitumen Primer - Black 25L 
Cromar Roof Felt Adhesive - Black 2.5 Litre 
ALM Code 7 Milled Lead - 1000mm x 3m 
Everbuild Everflex Premium+ 500 Bath & Sanitary Silicone - Clear 295ml (Box of 25) 
Youngman Spacemaker Loft Ladder (30234000) 
Everbuild Silicone Spray - 400ml 
Code 4 Cast Lead - 510mm x 3m 
Everbuild Everflex Heat Mate Sealant - Red 295ml 
Siroflex SX Contractors LMN Silicone OAK 300ml 
OX Pro Small Trowel - 200 x 75mm 
ALM Code 4 Milled Lead - 1000mm x 6m 
Code 8 Cast Lead - 1000mm x 3m 
Code 6 Cast Lead - 760mm x 3m 
Everflex Premium+ 450 Builders Silicone – Oak 300ml (Box of 25) 
Bond It High Gloss Block Sealer - Clear 5L 
Everbuild Quick Drying Clear Varnish - Gloss 750ml 
Thompson's Water Seal - 1L 
Uses
The Jetcem Deep by Everbuild is an outstanding, easy-to-mix, easy-to-apply, quick-setting cement that is perfect for repairing holes from 25-150mm. Everbuild technicians formulated this product to enable both tradespeople and D.I.Yers to easily use this product with a simple mixing process of adding water directly, creating a cement paste. Applications this product has been typically used in include;
- Interior and exterior repairs to gaps, cracks, walls and floors
- Repairing flags, stones, slabs and bricks
- Patching steps and window sills
- Pointing stone and brick
- Jointing earthenware drains and pipes
- Repair pools and ponds
- Setting W/C and sinks
- Leak sealing on concrete-based surfaces
- Setting railings and posts.
Preparation
Before commencing the application, ensure all surfaces are clean, sound, and free from contaminants such as dust, dirt, grease, oil, etc, and anything that can interfere with the adhesion.
Application
- Thoroughly wet surfaces to enhance the adhesion
- Using a clean vessel, add approx. 3 parts by volume Jetcem powder to 1 part by volume clean cold water and mix it immediately to a smooth, reasonably thick slump free paste.
- Note that this portion of cement is only workable for 5-10 minutes, so you should press it directly into the hold with a trowel or filling knife.
- If the product becomes stiff, dispose of it safely, as adding water doesn't improve workability; instead, it weakens the strength.
Limitations and Notes
- This product should not be used for load-bearing applications
- Do not use this product where chemical resistance is required.
- When repairing fishponds, seal repair with a suitable paint before re-stocking
- If you're filling gaps under 25mm, use Jetcem Rapid instead.
