ALM Code 5 Milled Lead - 1000mm x 6m 
Code 7 Cast Lead - 300mm x 6m 
Everbuild Everflex Premium+ 500 Bath & Sanitary Silicone - Clear 295ml (Box of 25) 
Bond It SBR Admixture - White 5L 
Timloc Telescopic Underfloor Vent 5-7 Courses 
OX Trade Torpedo Level 230mm / 9in 
OX Pro Top Steady Nail-On (Full Kit) Clamp Set 
OB41 Fast Tack Contact Adhesive Spray - 500ml 
Ronseal One Coat Water-Based Tile Paint - White Satin 750ml 
FloPlast Square Union Unit - White 
Timco Nut Mix Grab Pack - 980 Pieces 
Colron Refined Finishing Wax - 325g 
Ox Tools OX Pro Heavy Duty Sealant Gun - 290ml to 400ml 
Soudal Brake Cleaner - 400ml 
Everbuild Quick Drying Clear Varnish - Satin 250ml 
Timco Round Wire Nails, Pack of 40 
Soudal Repair Express Cement – Grey 900ml 
Klober Double Roman Roof Tile Vent - Slate Grey KG9857-3-0429 (Box of 10) 
Everbuild Evercryl One Coat Grey – 20kg 
Code 5 Cast Lead - 210mm x 3m 
Siroflex Trade Mortar Repair Cement - Grey 300ml 
BORA Centipede 2ft x 4ft x 30in Unit - 4 X-Cups + 2 Clamp + C/S Bag 
Bond It Lightweight Scrim Tape - 48mm x 90m White 
Everbuild Quick Drying Clear Varnish - Gloss 250ml 
Everbuild Lumberjack 550 Floor Adhesive – Buff 300ml 
Everbuild Firefoam B1 Gun Grade Expanding Foam - Pink 750ml 
Uses
KOS Fire Cement by Everbuild is an excellent product that resists high temperatures. It comes in a ready-mixed blend of thermo-setting resins and temperature-resistant inorganic fillers that cures when exposed to heat to give a seal that is resistant to heat.
Preparation
The surfaces must be prepared, remove any dust, oil, grease or other contaminants present, and wet all surfaces to give a good key.
Application
- Use the product straight from the tub; soften it with water slightly if needed.
- Use a trowel and apply well into the area, filling and covering the surface.
- After the first application, increase the heat of the cement gradually over 4 hours. A crack may start to form; if so, re-apply the cement to the area, this will create a smoke-tight seal.
Limitations
- This product is not suitable as a gas sealant
- Always moisten the surface before applying
- Always apply heat gradually
- The Black will turn into a buff/grey colour above 650°C
- Not suitable for use where the product is exposed to water
