Everbuild Febond PVA - 2.5L 
Leadax Lead Free Flashing Alternative 450mm (6M Rolls) 
Bond It Cove-Mate Coving Adhesive - White EU3 
Samac Silicone Bronze Nails - 1kg (45mm x 1.8mm) 
Soudal Fix ALL X-treme Power - White 290ml 
Soudal Lead Sheet Sealant 290ml - Grey 
OX Tools Pro Heavy Duty Flexi Tub - 73L 
Timloc Non-Profile Tile Vent Brown (Box of 8) 
Code 6 Cast Lead - 600mm x 6m 
OX Trade 3 Piece Paint Brush Set - 25/38/50mm 
Gorilla Glue - Dark Brown 60ml 
ALM Code 8 Milled Lead - 240mm x 6m 
Easy-Trim Universal Dry Verge System - Brown 
Everbuild Stick2 Carpet Fix Spray - 500ml 
Everflex Premium 175 Universal Acrylic Sealant - White 300ml (Box of 25) 
Hedgehog Gutter Brush Leaf Guard Brown – 4m x 100mm 
Everbuild 502 Wood Adhesive – 5 Litre 
Bond It Duct Tape - Black 48mm x 45M 
Oxyturbo Oxygen Refill 
Bond It SBR Admixture - White 5L 
Ronseal uPVC Paint - Black Satin 2.5L 
OB41 Silicone Lubricant Spray 400ml 
ALM Code 7 Milled Lead - 600mm x 6m 
OX Pro 5 Piece Wood Chisel Set in Velcro Case 
Uses
KOS Fire Cement by Everbuild is an excellent product that resists high temperatures. It comes in a ready-mixed blend of thermo-setting resins and temperature-resistant inorganic fillers that cures when exposed to heat to give a seal that is resistant to heat.
Preparation
The surfaces must be prepared, remove any dust, oil, grease or other contaminants present, and wet all surfaces to give a good key.
Application
- Use the product straight from the tub; soften it with water slightly if needed.
- Use a trowel and apply well into the area, filling and covering the surface.
- After the first application, increase the heat of the cement gradually over 4 hours. A crack may start to form; if so, re-apply the cement to the area, this will create a smoke-tight seal.
Limitations
- This product is not suitable as a gas sealant
- Always moisten the surface before applying
- Always apply heat gradually
- The Black will turn into a buff/grey colour above 650°C
- Not suitable for use where the product is exposed to water
