Spax Magnetic Bit Holder - 1 Piece 
Everbuild Lumberjack 30 Minute Polyurethane Wood Adhesive Liquid – 750ml 
Everbuild Everflex Pyro Mate Fire Rated Silicone – White 295ml 
Code 6 Cast Lead - 850mm x 6m 
Everbuild Multi-Stick Adhesive - White 350ml 
Thompson's Patio & Block Paving Seal - Wet Look 5L 
Ronseal 6 Year Anti Mould Paint - White Matt 750ml 
Code 5 Cast Lead - 510mm x 6m 
FloPlast Universal Hopper, Brown – 65-68mm 
Ronseal Multi Purpose Smooth Finish Filler - 2.2Kg 
Everbuild Superflow Sealant Gun - C3 (290ml - 310ml) 
Timloc 5" Aero Core with Cowl & Baffle Terracotta 
Lead Hall Fixing Clips - Pack of 50 
Evo-Stik Liquid Nails Solvent Free - Buff 290ml 
Everbuild Ultra Hard Floor Varnish – Clear 2.5 Litre (Gloss) 
FloPlast Half Round Downpipe Branch 67.5°, White 
Timco 30mm Cladding Pin - 250 Pieces 
ALM Code 7 Milled Lead - 210mm x 6m 
ALM Code 3 Milled Lead - 240mm x 6m 
Timco Zinc-Plated Mixed Washers Grab Pack - 1000 Pieces 
Code 7 Cast Lead - 150mm x 3m 
Everbuild PVC Hazard Tape - Red/White (50mm x 33m) 
Ronseal One Coat Water-Based Tile Paint - Magnolia Satin 750ml 
Bond It Saves Nails Solvent-Free - White EU3 
OX Tools Pro Heavy Duty Flexi Tub - 73L 
OX Pro Small Trowel - 200 x 75mm 
Uses
KOS Fire Cement by Everbuild is an excellent product that resists high temperatures. It comes in a ready-mixed blend of thermo-setting resins and temperature-resistant inorganic fillers that cures when exposed to heat to give a seal that is resistant to heat.
Preparation
The surfaces must be prepared, remove any dust, oil, grease or other contaminants present, and wet all surfaces to give a good key.
Application
- Use the product straight from the tub; soften it with water slightly if needed.
- Use a trowel and apply well into the area, filling and covering the surface.
- After the first application, increase the heat of the cement gradually over 4 hours. A crack may start to form; if so, re-apply the cement to the area, this will create a smoke-tight seal.
Limitations
- This product is not suitable as a gas sealant
- Always moisten the surface before applying
- Always apply heat gradually
- The Black will turn into a buff/grey colour above 650°C
- Not suitable for use where the product is exposed to water
