Bond It Bitumen Primer - Black 1L 
Everbuild Pinkgrip SF But It’s White – 380ml 
Cromar Black Bitumen Paint – 1 Litre 
Timco Heavy Duty Tarpaulin - 4m x 5m 
Irwin Jack Plus 880 Universal Handsaw - 20" 
BORA - PM-4500 Speedhorse 
Everbuild Exact Gap Foam - 750ml 
Klober Single Pantile Vent - Terracotta KG9860-0152 (Box of 10) 
Bond It Mould Stop - Clear 2.5L 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, White - 300ml (Box of 12) 
Bond It The Beast PU Adhesive - Brown 250ml 
Everbuild Gun A Nail Standard – White 310ml 
ALM Code 8 Milled Lead - 360mm x 6m 
Bond It Sealant Applicator Tool 
Hambleside Danelaw TV15/7 Tile Vent - Antique Red (Box of 5) 
Freeflow 68mm Round Gutter Drain Pipe 112° Branch - White 
Everbuild EB25 Ultimate Sealant & Adhesive – Anthracite 300ml (Box of 12) 
Samac Galvanised ELH Felt Nails - 1kg (15mm x 3.00mm) 
Soudal Parquet & Timber Sealant - Dark Grey 290ml 
Thompson's Emergency Roof Seal - Black 2.5L 
FloPlast Square Line Gutter 90° Black – 114mm 
Uses
KOS Fire Cement by Everbuild is an excellent product that resists high temperatures. It comes in a ready-mixed blend of thermo-setting resins and temperature-resistant inorganic fillers that cures when exposed to heat to give a seal that is resistant to heat.
Preparation
The surfaces must be prepared, remove any dust, oil, grease or other contaminants present, and wet all surfaces to give a good key.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle and fit it into a standard sealant gun/applicator.
- Using a firm, continuous pressure, apply a zig-zag motion over the surface, ensuring that when you press the surface together, it spreads, filling the whole surface.
Limitations
- This product is not suitable as a gas sealant
- Always moisten the surface before applying
- Always apply heat gradually
- The Black will turn into a buff/grey colour above 650°C
- Not suitable for use where the product is exposed to water
