ALM Code 4 Milled Lead - 1000mm x 6m 
Bond It Dec-Mate Flexible Filler - White EU4 
Code 8 Cast Lead - 180mm x 6m 
OX Tools Pro Chalk Line Reel 30m / 100ft 
Bond It Pro-Mate LMA Silicone - Translucent EU3 
Soudal Pro 40P PU Wood Adhesive - 750g 
Bond It Monster Water Resistant Tape - 48mm x 11m (Black) 
OX Tools Pro Self Levelling Laser Level - 60m 
Everbuild Black Jack 903 Bitumen Trowel Mastic – 2.5 Litre 
Everbuild P18 Gas Leak Detector - 400ml 
OX Pro 20oz Forged Steel Hatchet 
ALM Code 6 Milled Lead Flashing - 390mm x 6m 
Everbuild Plumbers PVC Pipe Cement - Clear 250ml (Box of 12) 
FrogTape® Delicate Surface Masking Tape - Yellow 36mm x 41.1m 
Ulti-Mate Interlocking Roof Vent Tile - Charcoal 
Bond It Rain-Mate All Weather Sealant - Clear EU3 
Bond It Mega Stik PU Adhesive - Beige 750ml 
ALM Code 5 Milled Lead - 800mm x 6m 
Uses
KOS Fire Cement by Everbuild is an excellent product that resists high temperatures. It comes in a ready-mixed blend of thermo-setting resins and temperature-resistant inorganic fillers that cures when exposed to heat to give a seal that is resistant to heat.
Preparation
The surfaces must be prepared, remove any dust, oil, grease or other contaminants present, and wet all surfaces to give a good key.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle and fit it into a standard sealant gun/applicator.
- Using a firm, continuous pressure, apply a zig-zag motion over the surface, ensuring that when you press the surface together, it spreads, filling the whole surface.
Limitations
- This product is not suitable as a gas sealant
- Always moisten the surface before applying
- Always apply heat gradually
- The Black will turn into a buff/grey colour above 650°C
- Not suitable for use where the product is exposed to water
