Everbuild Multi-Use Wonder Wipes Tub (Box of 12) 
Samac Stainless Steel Cladding Pins - 30mm x 2.0mm (Box of 250) 
Everbuild Everflex 225 Industrial & Glazing Silicone - White 295ml (Box of 25) 
Bond It B1 Fire Resistant PU Gun Grade Expanding Foam - Pink 750ml 
Ox Tools OX Pro Aviation Snips With Holster - Left Cut (Red) 
Hambleside Danelaw TV15/4 Tile Vent - Antique Red (Box of 5) 
Code 6 Cast Lead - 800mm x 3m 
Ronseal Precision Finish Brush - 2.5 Inch 
Ronseal Interior Varnish - Clear Gloss 2.5L 
Code 3 Cast Lead - 800mm x 6m 
Hambleside Danelaw TV15/7 Tile Vent - Black (Box of 5) 
Bond It PVA & Adhesive Sealer - White 5L 
Sika Patio Seal – 5 Litre 
Samac Hall Hooks - (Bags of 10) 
Permavent Plain Easy - Box of 20 
Everbuild KOS Fire Cement Buff – 1kg 
Estwing Hammer Curved Claw Smooth Face - 16oz 
OX Pro 20oz Forged Steel Hatchet 
Ronseal One Coat Damp Seal - White 750ml 
Everbuild Everflex Mirror Mate Adhesive - White 290ml 
Uses
The Lumberjack 30 Min PU Wood Adhesive by Everbuild offers outstanding bonding to common building surfaces and wood. Everbuild's technicians formulated this product to deliver a 30-minute curing time, allowing faster application, perfect for line manufacturing. Other manufacturing areas this is perfect for include manufacturing doors and windows, furniture and the construction of staircases and ladders.
Preparation
You should prepare the surface before starting the application, removing any contaminants on the surface, such as dirt, dust, oil, grease, etc. You need at least one surface to be porous; non-porous surfaces should be abraded to provide a key for the adhesive. You can further enhance the adhesion by slightly moistening one surface with a damp cloth; do not over-wet.
Application
- Remove the cap, cut the spout and apply to the surface
- You should apply it evenly to one surface, and once applied, bring surfaces together immediately.
Limitations
- One surface must be porous for successful bonding
- Not suitable for polyethylene, polypropylene, Teflon or Nylon.
- Surfaces must be damp, but the moisture content of wood must not exceed 30% w/w
- Only apply this product between the temperature of 5°C to 30°C
- Setting times will be increased at low temperatures and low humidity.
