Ronseal Exterior Yacht Varnish - Satin 2.5L 
Oxidised Bitumen Slab - 23kg 
Timco Velocity Premium Multi-Use Screws - Mixed Tray 
Everbuild Black Jack 901 Black Bitumen Paint – 25 Litre 
Bond It PVA & Adhesive Sealer White 1L - Box of 12 
Everbuild Bath & Kitchen Sealant - 200ml 
Everbuild Standard Nozzle - 6 Pack (290mm & 310mm) 
Timco Metal Cavity Anchors - M5 x 37 (45mm Screw) Pack of 70 
Code 5 Cast Lead - 1000mm x 6m 
Timco Copper Disc Rivets 
Bond It Stabilizing Solution - White 5L 
Code 4 Cast Lead - 240mm x 6m 
Ronseal Ultimate Finish Interior Floor Applicator Refill Pads 
FloPlast Half Round Running Outlet, Brown 
Code 8 Cast Lead - 914mm x 3m 
Everbuild Patio Wizard – 1 Litre 
Everbuild Everflex 115 G.P Building Mastic - Stone 285ml (Box of 25) 
Ronseal One Coat Water-Based Tile Paint - White Gloss 750ml 
Easy-Trim Lead R Flashing Smooth – 450mm x 5m 
OX Tools OXIT Sealant & Adhesive - White 290ml (Box of 12) 
Hambleside Danelaw MONO6+ Dry Fix Ventilated Mono Ridge System 6m 
Soudal PVCu Solvent Frame Cleaner - 1L 
Bond It Rain-Mate All Weather Sealant Black EU3 - Box of 12 
Uses
The Lumberjack 30 Min PU Wood Adhesive by Everbuild offers outstanding bonding to common building surfaces and wood. Everbuild's technicians formulated this product to deliver a 30-minute curing time, allowing faster application, perfect for line manufacturing. Other manufacturing areas this is perfect for include manufacturing doors and windows, furniture and the construction of staircases and ladders.
Preparation
You should prepare the surface before starting the application, removing any contaminants on the surface, such as dirt, dust, oil, grease, etc. You need at least one surface to be porous; non-porous surfaces should be abraded to provide a key for the adhesive. You can further enhance the adhesion by slightly moistening one surface with a damp cloth; do not over-wet.
Application
- Remove the cap, cut the spout and apply to the surface
- You should apply it evenly to one surface, and once applied, bring surfaces together immediately.
Limitations
- One surface must be porous for successful bonding
- Not suitable for polyethylene, polypropylene, Teflon or Nylon.
- Surfaces must be damp, but the moisture content of wood must not exceed 30% w/w
- Only apply this product between the temperature of 5°C to 30°C
- Setting times will be increased at low temperatures and low humidity.
