Everbuild Everflex 200 Contractors LMA Silicone - Black 295ml 
Timco M6 Zip-Fix Cavity Wall Fixing - 50 Pieces 
ALM Code 4 Milled Lead - 760mm x 6m 
EVO-STIK Sticks Like All Weather Adhesive - Clear 290ml 
Bond It PVA & Adhesive Sealer - White 1L 
Everbuild Stick2 Hard Plastic Adhesive - 30ml 
Ronseal Damp Seal Aerosol - White 400ml 
FloPlast Half Round Gutter Union, White 
Everbuild EB25 Ultimate Sealant & Adhesive – Grey 300ml (Box of 12) 
Ronseal Precision Finish Brush - 2.5 Inch 
Everbuild Forever Ivory Silicone Sealant – 295ml 
Cromar Bitumen Primer – Black 5 Litre 
Timco FirmaHold Collated Clipped Head Nails - Gun Nails (3.1mm x 90mm) 
Code 5 Cast Lead - 800mm x 3m 
Timco 25 Spanner Set 
Klober Uni Angle Ridge End Cap, Black 
Everbuild Everflex AquaMate Aquarium Sealant – Translucent 295ml (Box of 12) 
ALM Code 7 Milled Lead - 1000mm x 3m 
Bond It Monster Scrim Drywall Tape - White 100mm x 90m 
Everbuild Stick2 Industrial Superglue GP - Transparent 20g (Box of 20) 
Code 3 Cast Lead - 800mm x 3m 
Ulti-Mate 110/110mm Flexipipe 
Everbuild Everflex 115 G.P Building Mastic - Stone 285ml (Box of 25) 
10 x Timloc 3014C Over Fascia Ventilation System 1M - Black 
Everbuild 405 Path & Patio Seal – 5 Litre 
Bond It Cyanoacrylate Superglue Hi Viscosity - Clear 20g 
Uses
The Lumberjack 5 Min PU Wood Adhesive by Everbuild offers outstanding bonding to common building surfaces and wood. Everbuild's technicians formulated this product to deliver a 5-minute curing time, allowing faster application, perfect for line manufacturing. Other manufacturing areas this is perfect for include manufacturing doors and windows, furniture and the construction of staircases and ladders.
Preparation
You should prepare the surface before starting the application, removing any contaminants on the surface, such as dirt, dust, oil, grease, etc. You need at least one surface to be porous; non-porous surfaces should be abraded to provide a key for the adhesive. You can further enhance the adhesion by slightly moistening one surface with a damp cloth; do not over-wet.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle and fit it into a standard sealant gun/applicator.
- Using a firm pressure on the handle, apply the adhesive to one surface, and after applying it, bring the two surfaces together immediately.
Limitations
- One surface must be porous for successful bonding
- Not suitable for polyethylene, polypropylene, Teflon or Nylon.
- Surfaces must be damp, but the moisture content of wood must not exceed 30% w/w
- Only apply this product between the temperature of 5°C to 30°C
- Setting times will be increased at low temperatures and low humidity.
