Ronseal Stays White One Coat Non-Drip Paint - Satin 2.5L 
Code 5 Cast Lead - 914mm x 3m 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, Beige - 300ml (Box of 12) 
Bond It Cover-It Hardfloor & Glass Protector - Blue 625mm X 25M 
Code 6 Cast Lead - 600mm x 6m 
ALM Code 3 Milled Lead - 760mm x 3m 
Soudal Trade All Weather Sealant - Clear 290ml 
Soudal Soudafoam Hand Held One Shot - 150ml (Box of 12) 
ALM Code 6 Milled Lead Flashing - 210mm x 3m 
Soudal Roof & Gutter Sealant – Black 290ml 
Soudafoam Gap Filler Gun Grade – 750ml 
Ronseal Multi Purpose Filler Smooth Finish Powder - 2Kg 
Everbuild Lumberjack 550 Floor Adhesive – Buff 300ml 
Code 4 Cast Lead - 210mm x 3m 
Everbuild Stixall Extreme Power - Grey 290ml (Box of 12) 
Everbuild Opti-Mix Mortar Plasticiser – 1 Litre 
Timco M6 Zip-Fix Cavity Wall Fixings - 10 Pieces 
Bond It Mirror Pro Adhesive - White EU3 
Everbuild Anchorset Green 300 - Grey 300ml 
ALM Code 7 Milled Lead - 210mm x 6m 
ALM Code 8 Milled Lead - 914mm x 3m 
Bond It Frame-Mate Door & Window Sealant - White EU3 
Code 3 Cast Lead - 450mm x 3m 
FloPlast Square Line Pipe Connector Black 
Siroflex SX Contractors LMN Silicone OAK 300ml 
ALM Code 5 Milled Lead - 450mm x 3m 
Easy-Trim Universal Dry Verge System - Grey (Box of 50) 
Bond It D4 Professional Wood Adhesive - Clear 1L 
Everbuild External Frame Sealant - Grey 290ml (Box of 12) 
FloPlast Side Fix Rafter Bracket 
Everbuild Bath & Kitchen Sealant – White 290ml 
Uses
Multi-Purpose Wood filler by Everbuild is an exceptional product for fixing small holes, splits, surface imperfections and general damaged areas in wood. It works effectively, filling up to 5mm depth; once this product dries, it leaves a sandable surface, enabling you to smooth the surface to be flush, leaving no bumps.
The formula for this product is uniquely created with a waterproof filler, allowing both internal and external applications with this product. After repairing the wood, this product is suitable for stains, paints or even varnished with microporous stains.
Preparations
Remove any contaminants that can hinder this product; remove dust, oil, dirt, grease, and other impurities. Ensure that the surface is sound, clean and dry.
Application
- Stir the product well before using; complete this with a spreader or knife.
- Fill the hole projecting to allow for sanding; sand it to a smooth flush finish once it has dried.
Limitations
- The wood and filler will absorb some stains at different rates, and it's always best to test in a small area.
- Do not exceed 5mm in a single coat.
- Protect the surface from rain for at least 5 hours if the application is external.
