Ronseal One Coat All Surface Primer and Undercoat - White 250ml 
Code 6 Cast Lead - 180mm x 3m 
ALM Code 3 Milled Lead - 850mm x 6m 
Soudal Vaseline Lubricating & Protective Spray – 400ml 
Bond It Bitumen Paint - Black 25L 
Bond It AS900 Acoustic Sealant - White 900ml 
Sika MaxMix Waterproofer - 1 Litre 
Everbuild Everflex Heat Mate Sealant - Red 295ml 
Thompson's One Coat Damp Seal - White 2.5L 
ALM Code 6 Milled Lead Flashing - 210mm x 3m 
Everbuild Heavy Duty Multi-Use Wonder Wipes Tub (75 Wipes) 
Lead Roofing Wood Core Roll (50mm x 2.4m) 
FloPlast Black Half Round Adjustable Angle - 50° to 156° 
Lead Hall Fixing Clips - Pack of 50 
Ronseal Multi Purpose Smooth Finish Filler - 330g 
Thompson's Emergency Roof Seal - Black 2.5L 
Ronseal Stays White One Coat Non-Drip Paint - Satin 2.5L 
Klober Profile-Line Flat Tile Vent - Terracotta KG9856-3-0152 (Box of 10) 
Everbuild Seal Rite Strip / Smooth Out Twin Pack 
Uses
The Salt-Away by Everbuild is a unique, high-quality formula that combats unsightly marks left when salt evaporates from surfaces, leaving white marks and efflorescence. It's formulated using a special, non-hydrochloric acid, which is safer to handle and for organic life.
Issues that can occur if you leave this untreated can lead to corrosive damage and structural damage to some surfaces.
Preparation
Use a stiff brush to wipe the surface, removing any surface dirt or debris.
Application
- Dampen the surface you intend to apply this to
- Apply the Salt-Away to the surface, ensuring that you apply thorough, even coverage.
- Allow it to sit on the surface for 5-10 minutes, depending on levels of efflorescence.
- Wash the surface down thoroughly using clean water
- If the efflorescence is still present, repeat the application
Limitations
- Always test in a small, inconspicuous area to ensure surface compatibility.
- Do not use on artificially coloured stone, pavers or blocks.
- Any accidents, spillages or oversprays must be washed off immediately using clean water.
